Craftsman Table Saw Throat Plate

If you are a carpenter or woodworker, you must have a range of SAWS in your arsenal. Not only do you need a saw for professional reasons, but you should have some essential lightweight saws for your household works. There are a wide variety of saws on the market and you don’t know which saws are the most convenient, safe, and effective, and make the most precise cuts. Figuring out the right tool for the right task is quite a daunting task.

If you don’t want to get your head around this, you can trust us as we have extensively tested and analyzed a wide variety of cutting machinery from a lot of quality hand saws to many different types of power saws. Whether you want saws that make straight cuts, curved cuts, or patterns, here we are reviewing the most effective, affordable, and easy-to-use craftsman table saw throat plate with which you can easily get your job done and you will eventually get satisfied with whatever you are doing.

# Preview Product Score
1 Phenolic Zero Clearance Insert for Delta Uni-Saw Contractor… 9.4
2 Craftsman 089110118702 Throat Table Saw Plate Assembly 9.5
3 Craftsman 089037008711 Table Saw Dado Insert Genuine Original… 9.4
4 Porter Cable OEM 5140097-90 Table Saw Dado Throat… 9.6
5 Newer Craftsman/Rigid Table Saw Zero Clearance Insert (After… 9.7
6 DEWALT Dado Throatplate for 10-Inch Portable Table Saw… 9.4
7 TonGass Dado Throat Plate Compatible with DeWalt 10″… 9.6
8 Table Inserts (Pack of 2) for 14″ Band… 9.2
9 GuiTT 36-502 Dado Throat Plate Metal For Delta… 8.9
10 Ryobi OEM 89037008711 Tablesaw Dado Throat Plate RTS20… 9.5
1

Phenolic Zero Clearance Insert for Delta Uni-Saw Contractor | Large Grizzly and Other Table Saws with a 13-3/8” x 3-3/4” x 1/2” Throat Plate Opening

  • MEASURE YOUR FACTORY INSERT AND COMPARE SIZE BEFORE YOU ORDER. Zero Clearance inserts are table saw specific. Since every table saw brand and manufacturer is different, we recommend that you measure the exact length, width and thickness of your table saw insert or opening and compare it to the size we list. Also be aware of the shape of your current insert of whether its round, square ends or if there are any indents or protruding notches. Insert colors may vary from images shown.
  • If you own a table saw, then you probably have had smaller pieces of wood get caught between the saw blade and the factory supplied throat plate opening. This can cause that piece of wood to jam up against the blade and go flying across the room or worse yet, right back at you. Zero clearances help minimize this situation from happening since there is no gap between the blade and the zero clearance opening. The opening is more like a custom slot cut to the exact width of your table saw blade.
  • Another great reason to use a zero clearance insert is to help reduce that pesky and irritating tear out you always tend to get on your cuts. Without a zero clearance, the wood has no support by the blade to prevent the wood from tearing out. This is especially true when cutting plywood. Zero clearance inserts help prevent tear out by essentially enveloping the blade on all sides which doesn’t allow the wood to tear out since there is not gap between the blade and insert.
  • Zero Clearance inserts can be used in conjunction with most any table saw blade including thin kerf, standard kerf and carbide tipped blades. You can also use zero clearance inserts with dado blade sets. The reason you would use zero clearance inserts with dado blades is to reduce the amount of tear out the dado blade set produces. We recommend that you use separate zero clearance inserts for dado blades since the gap for dados will be much wider than standard width table saw blades.
  • This zero clearance insert is made from a high density phenolic material that was chosen for its ability to stand up to everyday workshop use. The insert features two Snug Fit sand-able side tabs that allow you to remove a little material at a time for a perfect fit if necessary. The insert also features a top and a side Snug Fit Screw for a tight fit to you saw with no movement!

2

Craftsman 089110118702 Throat Table Saw Plate Assembly

  • Throat plate assembly is used on table saw
  • Fits Craftsman model 315.284620 and multiple Craftsman models
  • 4-Inch long, 1-Inch wide, and 1-Inch high
  • Package weight of this item is 1-Pound

3

Craftsman 089037008711 Table Saw Dado Insert Genuine Original Equipment Manufacturer (OEM) Part

  • This part is compatible with models including; 315284620
  • This Is A Manufacturer Substitution. Part May Differ In Appearance But Is A Functional Equivalent To Prior Parts Including; 089110118708
  • Genuine Original Equipment Manufacturer (Oem) Part. Compatible Brands: Craftsman
  • This Dado Insert (Part Number 089037008711) Is For Table Saws
  • Follow The Instructions In Your Owner’s Manual When Installing This Part

4

Porter Cable OEM 5140097-90 Table Saw Dado Throat Plate PCB220TS

  • Genuine, OEM Porter Cable Replacement Part
  • Porter Cable replacement dado throat plate, part number 5140097-90
  • Compatible with: PCB220TS Type 1
  • Measures approximately 14.55 X 2.30 X 0.70 inches

5

Newer Craftsman/Rigid Table Saw Zero Clearance Insert (After 1988) by Peachtree Woodworking PW953 Approx Dims: 14 in x 3-3/4 in x 3/16 in

  • The insert is blank so you can custom fit the blade slot by passing your blade through it.
  • Helps to prevent tear-out plus close the large factory gap.
  • Fits most (1988 and newer) 10″ Belt Drive Models, Ridgid TS-2412, TS-2424 & TS-2400
  • 14″ x 3 3/4″ x 3/16″

6

DEWALT Dado Throatplate for 10-Inch Portable Table Saw (DWE7402DI)

  • Allows for use of stacked dado cutters
  • Can be used with DWE7490 and DWE7491 versions
  • For woodworking and building
  • Package Weight: 0.372 kilograms

7

TonGass Dado Throat Plate Compatible with DeWalt 10″ Portable Table Saw (DWE7490 DWE7491 DWE7491RS DWE7492) – Made from Impact-Resistant PC/PBT Blend Material

  • Ill-fitting dado throat plates can cause injury and equipment damage. This table saw dado throat plate will fit and lock in place like the stock plate. Also, like the stock plate, this dado throat plate also comes with 4 adjustment screws
  • Please take note that the dado throat plate looks very similar to another throat plate model. Ensure that your table saw model is listed or meets all specifications
  • Compatible with DeWalt 10″ Portable Table Saw (DWE7490 DWE7491 DWE7491RS (Type 2) DWE7492 table saw models)
  • And with dimensions of 13 1/2″ x 3 11/16″ x 7/16″, this throat plate is a universal fit for several 10″ portable job site/contractor table saws that have dado capabilities. It can support up to an 8-inch diameter stacked dado that is up to 13/16″ wide
  • MADE FROM IMPACT-RESISTANT PC/PBT BLEND MATERIAL – This is no flimsy plastic. PC/PBT construction-grade material blends have high impact resistance, dimensional stability, heat resistance, and chemical resistance. Unlike other plastic blends, PC/PBT is rigid, tough, and strong

8

Table Inserts (Pack of 2) for 14″ Band saws or Scroll saws(Diameter: 2.5 in, Thickness: 0.1 in.Please Confirm That The Size You Want to Buy is consistent with This Product)

  • Please measure your saw as some Delta & Rockwell &Grizzly14″ bandsaws has slightly smaller holes for the throat plate. If so some slight filing or sanding may be required.If you mind, please don’t buy it.
  • Make sure your insert recess has the locating pin on the side, not on the rear.
  • use on 14″ Band Saws and 24″ Scroll Saws.2&1/2″ X .100 thick Please measure your saws recess to ensure proper fit
  • They fit Delta, Rockwell, some Jet, Ridgid, Grizzly, and other imports.
  • IMPORTANT INSTALLATION NOTE:I have sold several hundred of these and occasionally someone will have the problem of it being a bit too large. First make sure the lip of the hole is free from dirt. If a table alignment pin,is not tight or missing,often the blade mounting slot will close up some over time which reduces the insert hole diameter slightly. I tap a flat head screw driver into the blade installation slot a bit to wedge it open. That should spread the insert hole enough for it to fit

9

GuiTT 36-502 Dado Throat Plate Metal For Delta Table saws Replace 36-5000,36-5052,36-5100, 36-5152

  • ✔【Great Value For Money】Work with any 13/16″ X 8″ diameter stacked dado.High strength, anti-aging , not easy to damage.Low price, easy Installation,Save time and money.
  • ✔【Adaptation Model】Replace 36-502,36-5000,36-5052,36-5100, 36-5152 Compatible with Delta 36-725 Table Saw.
  • ✔【Advantage】Our product is made of reinforced materials to insure it lasts longer than the factory part, meets or exceeds OEM standards. You can replace old or damaged parts directly.
  • ✔【Notice】Please pay attention to the position of the tabs during installation, and make slight adjustments if necessary.Check the size before purchase.
  • ✔【Quality Assurance】Two-year warranty,full refund for any product quality problems.GuiTT for a true worry-free experience.

10

Ryobi OEM 89037008711 Tablesaw Dado Throat Plate RTS20 RTS30

  • Genuine, OEM Ryobi Replacement Part
  • Ryobi replacement dado throat plate, part number 89037008711
  • Compatible with: RTS20, RTS30

Saws are expensive and most people are afraid of this fact. We successfully enlisted a few craftsman table saw throat plate that are not only great for efficiency and precision, but they are the most affordable and budget-friendly saws you will ever get. Moreover, these saws can get your job done more quickly than any ordinary saws you will find on the market. Some are even portable and compact which can be easily brought to the Jobsite. Choosing the right craftsman table saw throat plate takes all the efforts and hard work, we have done it all for you. Check out the saws that we have chosen for you.

Buying guide

Before buying any typical saw, one must look for some facts to find the most perfect saw of his kind. Because when you are alone searching for a saw, chances are really high that you can get deceived by not knowing some important information. If you have that information beforehand, things can be easy for you to find the best craftsman table saw throat plate of your kind. Here are some factors to consider before buying the best craftsman table saw throat plate.

Specific task

All the saws are not made equal and which saw you need is determined by the task you do. However, some saws are versatile that can be used for multiple applications. Here in this guide of the best craftsman table saw throat plate , we have recommended the saws with which you can make straight cuts and angular cuts as well. Below are some types of saws which are used for specific purposes

1. Circular saw:

These saws are used to cut materials at different angles. This type of saws is popular because they can be easily transported to different construction sites. They are also compatible with different blades. So you can set different types of blades in the saw which can cut through distinct materials from wood to stone to ceramics.

2. Miter saw:

These saws are equivalent to circular saws but specially designed to make precise angular cuts, notable for miter joints.

3. Jigsaw:

Jigsaws are used to make both straight and circular cuts.

4. Stationary:

Stationary saws can make cuts in a range of materials from woods to plastic to pipe. This tool also makes less noise which is suitable for residential areas. However, the disadvantages are this saw can’t make deep cutting and is not portable to the construction sites

5. Hand saw:

Hand saws are guided by the hand of the users, using the force of hand to power it. These saws are not powered by electricity , gas or any power sources. These are suitable for DIYs and small household tasks. There are different types of hand saw with many of them suitable for a variety of tasks.

Safety

Safety is a major concern while using a saw, especially if you are not a professional. Some saws are complex and therefore need expertise to use while others are very simple. When you use a saw, there are risks of kickback and mistakenly guiding the hand towards blade which cause serious injuries. That’s why these saws are becoming more popular amongst the carpenters and woodworker as these are more safe to use such as stationary saw. The best craftsman table saw throat plate we have selected are well analyzed based on the safety issue.

Power Source

Different saws are powered using distinct power sources such as gasoline, electric and battery-powered. The task will decide which power you need, The most powerful saws are gasoline-fueled. As a rule of thumb, we can suggest that if you do it indoors, then opt for an electric corded saw. If you do work outdoors, pick a battery powered saw.

Sawdust collection system

Some saws are featured with a special vacuum cleaner which sucks all the dust particles. If you are very health concerned and want to keep your workplace clean, you can choose a saw with sawdust collection system

Price

Saw can be very expensive based on its features and applications . However, if you try a little bit, you can find a saw within your budget that is perfect for your needs. We consider the price and affordability while recommending the best craftsman table saw throat plate.

Special features

The product quality is another important aspect to consider while choosing the right Saw. The smooth start, the trajectory of movement , having option for emergency shutdown and minimum safety standards are some features to look for before picking a specific one. In our best craftsman table saw throat plate, we have thoroughly checked these things

Conclusion:

We have implement artificial intelligence to test and analyze thousands of products. After scrutinizing every aspect of the product from availability to precision to affordability , they provide us with a handful of best products which are most suitable for most of our readers. I hope this article about the best craftsman table saw throat plate will help you to pick the right saw whether you are looking for outdoor construction work or trimming a big tree or simple indoor household task.

Leave a Comment