Craftsman Table Saw Model 315

If you are a carpenter or woodworker, you must have a range of SAWS in your arsenal. Not only do you need a saw for professional reasons, but you should have some essential lightweight saws for your household works. There are a wide variety of saws on the market and you don’t know which saws are the most convenient, safe, and effective, and make the most precise cuts. Figuring out the right tool for the right task is quite a daunting task.

If you don’t want to get your head around this, you can trust us as we have extensively tested and analyzed a wide variety of cutting machinery from a lot of quality hand saws to many different types of power saws. Whether you want saws that make straight cuts, curved cuts, or patterns, here we are reviewing the most effective, affordable, and easy-to-use craftsman table saw model 315 with which you can easily get your job done and you will eventually get satisfied with whatever you are doing.

# Preview Product Score
1 Craftsman 315 Model Series 10″ Belt Drive Table… 9.7
2 2 Pack Arbor Bearings Fits 10″ Belt Drive… 9.0
3 Craftsman 089037011711 Table Saw Table Stand Clamp Knob… 9.5
4 Craftsman Table Saw V – Belt Kit with… 9.7
5 Craftsman Fenner Power Twist Belt Kit with Pulleys… 9.7
6 Leecraft CR-1 Zero Clearance Table Saw Insert (For… 9.8
7 Table Saw Switch Replacement Fits for Ryobi Craftsman… 9.9
8 Table Saw Switch Replacement Compatible with Ryobi and… 9.6
9 SW7A Table Saw On-Off Toggle Switch For Delta,… 9.7
10 Arbor Bearing Rebuild Kit Sears Craftsman 10″ Belt… 9.7
1

Craftsman 315 Model Series 10″ Belt Drive Table Saw Handwheel Handle Crank 12mm Bore Tilt or Elevation Shaft. (Please See Model List)

  • This handwheel is for Craftsman Belt Drive Table Saw Models 315.228310, 315.228390, 315.228410, 315.228490, 315.228510, 315.228590, 315.228930, and 315.248200. It will not fit any models not listed..
  • 4 1/2″ Diameter Handwheel with a 12mm Bore, Fts 12mm round or “D” shaped shafts and attaches with a set screw. Used on the blade elevation and tilt shafts.
  • This handwheel attaches differently than the original. The attachment method is detailed in the last three photos
  • Replaces Sears Part Numbers: 979918-001, 979918-02 & 977227-002

2

2 Pack Arbor Bearings Fits 10″ Belt Drive Sears Craftsman 315228390/315.228390 Table Saw

  • 2 Pack blade arbor bearings replacement
  • Fits 10″ belt drive Sears Craftsman table saw model 315228390 and 315.228390
  • You get 2 new bearings for the blade arbor

3

Craftsman 089037011711 Table Saw Table Stand Clamp Knob Genuine Original Equipment Manufacturer (OEM) Part

  • This part is compatible with models including; 315218050
  • This is a manufacturer substitution. Part may differ in appearance but is a functional equivalent to prior parts including; 0121011302,089037011007
  • Genuine Original Equipment Manufacturer (OEM) part. Compatible Brands: Craftsman
  • This table stand clamp knob (part number 089037011711) is for table saws
  • Unplug the table saw before installing this part

4

Craftsman Table Saw V – Belt Kit with Pulley Set & Keys 315.xxxxx series saws

  • Sears Craftsman Belt Drive Table Saw Replacement Pulley and Belt Kit
  • This belt kit has a non-standard pulley and key combination and is intended only for Craftsman 10″ Belt Drive Table Saw models 315.228510, 315.228390, 315.228310, 315.228590, 315.228930, 315.228490, & 315.228410. This set will not fit other brands or models
  • The pulleys are 2 1/4″ diameter with a 5/8″ bore, the keys are 5mm x 5mm and the belt is 41″ long.
  • This pulley set is a replacement for Craftsman part #, 979900-001, pulley and part #, 979894-001, key. The belt is Craftsman part number STD304420

5

Craftsman Fenner Power Twist Belt Kit with Pulleys & Keys 315.xxxxxx series Table Saw

  • Sears Craftsman Belt Drive Table Saw Replacement Pulley and Belt Kit with upgrade Fenner Power Twist Link Belt.
  • This belt kit has a non-standard pulley and key combination and is intended only for Craftsman 10″ Belt Drive Table Saw models 315.228510, 315.228390, 315.228310, 315.228590, 315.228930, 315.228490, & 315.228410. This set will not fit other brands or models
  • The pulleys are 2 1/4″ diameter with a 5/8″ bore, the keys are 5mm x 5mm and the belt is 41″ long.
  • This pulley set is a replacement for Craftsman part #, 979900-001, pulley and part #, 979894-001, key. The belt is a replacement for Craftsman part number STD304420

6

Leecraft CR-1 Zero Clearance Table Saw Insert (For Craftsman/Sears)(Colors May Vary)

  • Elimantes dangerous gap around blade where thin off-cuts can get wedged
  • Fits: Sears Craftsman 10″ belt-drive models 1977 to mid 2004 (check size, see DL-1U), RIDGID TS2412, TS2424, TS2400
  • Measures: 14″ x 3-3/4″ x 3/16″ (PLEASE MEASURE before ORDERING)
  • Offers superior rigidity, flatness, durability, and low friction; reduces chip-out and splintering
  • PLEASE NOTE: CR-1 does not fit models TS2400LS, TS2400-1 or the new TS2410 (See RG-2)

7

Table Saw Switch Replacement Fits for Ryobi Craftsman – Safety Locking Switch Power Tool Switch on/off Switch for Craftman Ryobi 10″ Table Saw, 125V/250V, 4 Poles Power Switch, Replaces 089110109712

  • This table saw switch compatible with Craftsman & Ryobi table saw
  • Easy to install and give you a quick on/off and reversing
  • Amperage: 12 Amps at 250V, 20 Amps at 125V.
  • 2 position, 4 poles switch, with removable safety key for a quick power off
  • This table saw switch is made of high quality durable plastic, solid to use.

8

Table Saw Switch Replacement Compatible with Ryobi and Craftsman, Safety Power Tool Switch,Paddle On/Off Switch for Table Saw 125v

  • ✅ 【 TABLE SAW SWITCH】: The Paddle Switch for Table Saw,compatible with most Craftsman and Ryobi Table Saws. Note,it’s not created or sold by Craftsman/Ryobi.
  • ✅ 【 FUNCTION】:Removalbe safety key to lock the switch prevents from accidental operations.Large paddle for emergency stop.
  • ✅ 【 PREMIUM QUALITY】: This safety locking switch is made of high quality durable plastic.They are approved by UL, TUV, CSA, CE, ETL standards and they fit most of the power tools on the market.
  • The product is not sponsored or endorsed by Ryobi,Craftsman

9

SW7A Table Saw On-Off Toggle Switch For Delta, Ryobi and Craftsman Workbench Switch Replacement Part

  • New SW7A On-Off toggle switch Replacement Part
  • Replaces Part #: 46023, 489105-00, 1343759, OR90037, 400060680002, 438010170140
  • The Toggle Switch is suitable for openings of 7/8″ x 1.5″
  • Toggle Switch Specification: 20A 125V OR 12A 250V

10

Arbor Bearing Rebuild Kit Sears Craftsman 10″ Belt Drive Table Saw 820015 113.xxxx

  • Sears Craftsman 10″, Belt Drive, Table Saw Arbor Bearing Kit. Fit most 113.xxxxxx model series saws.
  • Bearings are 5/8″ ID, 35mm OD, and 11mm wide. These bearings have dual rubber seals same as the original bearings on later model saws.

Saws are expensive and most people are afraid of this fact. We successfully enlisted a few craftsman table saw model 315 that are not only great for efficiency and precision, but they are the most affordable and budget-friendly saws you will ever get. Moreover, these saws can get your job done more quickly than any ordinary saws you will find on the market. Some are even portable and compact which can be easily brought to the Jobsite. Choosing the right craftsman table saw model 315 takes all the efforts and hard work, we have done it all for you. Check out the saws that we have chosen for you.

Buying guide

Before buying any typical saw, one must look for some facts to find the most perfect saw of his kind. Because when you are alone searching for a saw, chances are really high that you can get deceived by not knowing some important information. If you have that information beforehand, things can be easy for you to find the best craftsman table saw model 315 of your kind. Here are some factors to consider before buying the best craftsman table saw model 315.

Specific task

All the saws are not made equal and which saw you need is determined by the task you do. However, some saws are versatile that can be used for multiple applications. Here in this guide of the best craftsman table saw model 315 , we have recommended the saws with which you can make straight cuts and angular cuts as well. Below are some types of saws which are used for specific purposes

1. Circular saw:

These saws are used to cut materials at different angles. This type of saws is popular because they can be easily transported to different construction sites. They are also compatible with different blades. So you can set different types of blades in the saw which can cut through distinct materials from wood to stone to ceramics.

2. Miter saw:

These saws are equivalent to circular saws but specially designed to make precise angular cuts, notable for miter joints.

3. Jigsaw:

Jigsaws are used to make both straight and circular cuts.

4. Stationary:

Stationary saws can make cuts in a range of materials from woods to plastic to pipe. This tool also makes less noise which is suitable for residential areas. However, the disadvantages are this saw can’t make deep cutting and is not portable to the construction sites

5. Hand saw:

Hand saws are guided by the hand of the users, using the force of hand to power it. These saws are not powered by electricity , gas or any power sources. These are suitable for DIYs and small household tasks. There are different types of hand saw with many of them suitable for a variety of tasks.

Safety

Safety is a major concern while using a saw, especially if you are not a professional. Some saws are complex and therefore need expertise to use while others are very simple. When you use a saw, there are risks of kickback and mistakenly guiding the hand towards blade which cause serious injuries. That’s why these saws are becoming more popular amongst the carpenters and woodworker as these are more safe to use such as stationary saw. The best craftsman table saw model 315 we have selected are well analyzed based on the safety issue.

Power Source

Different saws are powered using distinct power sources such as gasoline, electric and battery-powered. The task will decide which power you need, The most powerful saws are gasoline-fueled. As a rule of thumb, we can suggest that if you do it indoors, then opt for an electric corded saw. If you do work outdoors, pick a battery powered saw.

Sawdust collection system

Some saws are featured with a special vacuum cleaner which sucks all the dust particles. If you are very health concerned and want to keep your workplace clean, you can choose a saw with sawdust collection system

Price

Saw can be very expensive based on its features and applications . However, if you try a little bit, you can find a saw within your budget that is perfect for your needs. We consider the price and affordability while recommending the best craftsman table saw model 315.

Special features

The product quality is another important aspect to consider while choosing the right Saw. The smooth start, the trajectory of movement , having option for emergency shutdown and minimum safety standards are some features to look for before picking a specific one. In our best craftsman table saw model 315, we have thoroughly checked these things

Conclusion:

We have implement artificial intelligence to test and analyze thousands of products. After scrutinizing every aspect of the product from availability to precision to affordability , they provide us with a handful of best products which are most suitable for most of our readers. I hope this article about the best craftsman table saw model 315 will help you to pick the right saw whether you are looking for outdoor construction work or trimming a big tree or simple indoor household task.

Leave a Comment