Craftsman 137 Table Saw Fence

If you are a carpenter or woodworker, you must have a range of SAWS in your arsenal. Not only do you need a saw for professional reasons, but you should have some essential lightweight saws for your household works. There are a wide variety of saws on the market and you don’t know which saws are the most convenient, safe, and effective, and make the most precise cuts. Figuring out the right tool for the right task is quite a daunting task.

If you don’t want to get your head around this, you can trust us as we have extensively tested and analyzed a wide variety of cutting machinery from a lot of quality hand saws to many different types of power saws. Whether you want saws that make straight cuts, curved cuts, or patterns, here we are reviewing the most effective, affordable, and easy-to-use craftsman 137 table saw fence with which you can easily get your job done and you will eventually get satisfied with whatever you are doing.

# Preview Product Score
1 POWERTEC BS900RF Rip Fence for POWERTEC BS900 Wood… 9.4
2 Rip Fence for Ryobi RTS10G, RTS10NS 10″ Table… 9.0
3 HQRP On-Off Paddle Switch Compatible with Sears Craftsman… 9.6
4 Yellow Safety Switch Key Compatible with Craftsman Radial… 9.2
5 Fulton Precision Miter Gauge with Aluminum Miter Fence… 9.7
6 Table Saw Switch Replacement Fits for Ryobi Craftsman… 9.9
7 Sears Craftsman Motor Armature Bearing Set, 137.XXXXXX Series… 9.7
8 Craftsman Motor Armature Bearing Cup Motorized Table Saws,… 9.7
9 Skil 3410 Table Saw Replacement Rip Fence Assembly… 9.4
1

POWERTEC BS900RF Rip Fence for POWERTEC BS900 Wood Band Saw and Similar Band Saws with a Work Table Size of 11-1/8” to 11-13/16”

  • Sturdy Extruded aluminum construction means it’s solid and durable
  • Provides for straight parallel cuts.
  • By using the handy adjustable cam, the clamp can adjust from 11-3/8-Inch up to 12-Inch
  • Arrives fully assembled, right out of the package
  • Simple, effective cam lever action means device is securely locked in place. Hassle free to store and move about – weighing in at 13.4 ounces

2

Rip Fence for Ryobi RTS10G, RTS10NS 10″ Table Saw – 089040002702

  • Genuine OEM Ryobi Replacement Rip Fence
  • Fits table saw models RTS10NS and RTS10G. Does not fit RTS10.
  • Fence bar measures approximately 18.5″ in length

3

HQRP On-Off Paddle Switch Compatible with Sears Craftsman 137 Series Table Saw & Drill Press 0LWG 27A1 0LWC 0LVW, UL Listed

  • HQRP® On-Off Paddle Switch; 20A 125V; 12A 250V; UL Listed;
  • This Switch Will Snap Into a 7/8″ x 1.5″ Opening; The Switch features a large ON/OFF paddle with a removable safety key that can be used to disable the switch;
  • This Part Replaces Part #: 0LWG, 27A1, 0LWC, 0LVW, D2751, 901801, 1344600, 400060680002, 903981, 1343759, 489105-00, 46023, OR90037, 438010170141; Voltage: 125/250V; Amperage: 20/12A; 200 Days warranty!
  • Compatible With Sears Craftsman 137 Series Table Saw & Drill Press 0LWG 27A1 0LWC 0LVW;

4

Yellow Safety Switch Key Compatible with Craftsman Radial Arm Jointer Band Drill Sears Table Saw, Sander, Band Saw, Drill Press Parts- Oval (2pcs-pack)

  • This key is an OEM injection molded part. It is not a 3D printed copy.
  • This Safety Key fits many Sears Craftsman Rocker Style, Power Switchs used on many models of Craftsman power tools.
  • Key head is and approximate 7/8″ in diameter but is slightly oval shaped. The longest leg is about 15/16″ and the short leg is about 5/8″ long.
  • Sears sold this key under several part numbers including 22255, 60256, and 976863-001.
  • The last picture shows the key installed in a typical switch. This listing is for the KEY ONLY

5

Fulton Precision Miter Gauge with Aluminum Miter Fence with 45 degree Angled Ends for Maximum Stock Support and a Repetitive Cut Flip Stop

  • The Fulton Miter Gauge is a high quality, well thought out and economical solution for your table saw cross cutting needs.The Aluminum Miter fence is equally well thought out with its 45 degree ends for unsurpassed workpiece support and its ability to mounted to most any miter gauge. Also included is a handy aluminum flip stop for repetitive angled cuts on your table saw. Together these three items are the perfect compliment to each other for your table saw cutting needs.
  • The .200” thick, adjustable, solid aluminum head is machined with 13 positive stop holes. 1 hole is at 90 degrees while the 6 holes on both sides are at 22.5, 30, 45, 60, 67.5 and 90 degrees. The positive stops are perfect for many woodworking projects as they are the angles that are typically used.To adjust the head you simply loosen the post knob handle, pull the spring loaded indexing pin outward, rotate the head to the desired position, release the pin and lock into place.
  • The head is mounted to a solid steel miter bar that measure 18” in length and is .354” thick by .730” wide. Standard miter slots are 3/4” x 3/8” with a 1/8” “T” slot (slight variances from brand to brand) running the length on the bottom of the slot. The steel miter bar is equipped with a metal, removable retaining disc that measures 7/8” in diameter and is just shy of 1/8” to fit into to the “T” slot to prevent accidental lifting when feeding your stock through.
  • Made from a single piece of extruded aluminum, this precision miter gauge fence is not only durable, its accurate and saves setup time. The fence is designed to be used with most any miter gauge with its off-set mounting track on the back of the fence. The off-set track allows you to flip the fence for lower profile miter gauge mounts and flip back for standard height miter gauges. The fence can be mounted to older miter gauges by adding a wooden block mount with wooden screws if necessary.
  • Both ends of the fence are cut at exactly 45 degrees. This allows you to position the fence extra close to the saw blade (with the power turned off) so you have even more control over the workpiece you are cutting. The fence comes with a flip stop that makes repetitive cuts a breeze. When not in use the flip stop can be flipped up and out of the way. Also include are two sticky back measuring tapes. 1 tape is left to right reading and the other is right to left reading.

6

Table Saw Switch Replacement Fits for Ryobi Craftsman – Safety Locking Switch Power Tool Switch on/off Switch for Craftman Ryobi 10″ Table Saw, 125V/250V, 4 Poles Power Switch, Replaces 089110109712

  • This table saw switch compatible with Craftsman & Ryobi table saw
  • Easy to install and give you a quick on/off and reversing
  • Amperage: 12 Amps at 250V, 20 Amps at 125V.
  • 2 position, 4 poles switch, with removable safety key for a quick power off
  • This table saw switch is made of high quality durable plastic, solid to use.

7

Sears Craftsman Motor Armature Bearing Set, 137.XXXXXX Series Motorized Table Saws,RM870 RM871 & RM872 Motors

  • Sears Craftsman Motor Armature Bearing Set for 137.xxxxx Series Motorized 10″ Table Saws with motors marked RM870, RM871, & RM872.
  • The outboard bearing has a 30mm OD, 10mm ID, and is 9mm wide. The inboard bearing has a 32mm OD, 12mm ID, and is 10mm wide.
  • These will fit the following models: 137.218240, 137.218020, 137.218780, 137.248830, 137.218040, 137.218041, 137.218101, 137.272220, 137.248850, 137.218100, 137.212920, 137.248250, 137.285540, 137.218251, 137.218010, 137.218030, 137.218250, 137.248101, 137.375630, 137.248100, 137.212150, 137.248840, 137.271140, 137.271180, 137.232040, 137.228010, 137.248481, 137.248880, 137.248480
  • Listing is for the bearings only, The last 5 pictures are for application reference only.

8

Craftsman Motor Armature Bearing Cup Motorized Table Saws, RM871 RM872 137.XXXXX

  • Sears Craftsman Motor Armature Bearing Cup/Isolator for 137.xxxxx Series Motorized 10″ Table Saws with motors marked as RM871 or RM872.
  • This listing is for the rubber bearing cup only as shown in the first two photos. The last 4 photos are for reference to identify application.
  • The bearing cup has a 34mm OD and a 30mm ID
  • Fits the following models: 137.218240, 137.218020, 137.218780, 137.218760, 137.248830, 137.218040, 137.218041, 137.218101, 137.272220, 137.248850, 137.218100, 137.212920, 137.248250, 137.285540, 137.218251, 137.218010, 137.218030, 137.218250, 137.248101, 137.375630, 137.248100, 137.212150, 137.248840, 137.271140, 137.271180, 137.232040, 137.228010, 137.248481, 137.248880, 137.248480

9

Skil 3410 Table Saw Replacement Rip Fence Assembly # 2610011707

  • Includes (1) 2610011707 Rip Fence
  • New, Bulk Packed
  • Genuine Skil Replacement Part
  • Consult owners manual for proper part number identification and proper installation

Saws are expensive and most people are afraid of this fact. We successfully enlisted a few craftsman 137 table saw fence that are not only great for efficiency and precision, but they are the most affordable and budget-friendly saws you will ever get. Moreover, these saws can get your job done more quickly than any ordinary saws you will find on the market. Some are even portable and compact which can be easily brought to the Jobsite. Choosing the right craftsman 137 table saw fence takes all the efforts and hard work, we have done it all for you. Check out the saws that we have chosen for you.

Buying guide

Before buying any typical saw, one must look for some facts to find the most perfect saw of his kind. Because when you are alone searching for a saw, chances are really high that you can get deceived by not knowing some important information. If you have that information beforehand, things can be easy for you to find the best craftsman 137 table saw fence of your kind. Here are some factors to consider before buying the best craftsman 137 table saw fence.

Specific task

All the saws are not made equal and which saw you need is determined by the task you do. However, some saws are versatile that can be used for multiple applications. Here in this guide of the best craftsman 137 table saw fence , we have recommended the saws with which you can make straight cuts and angular cuts as well. Below are some types of saws which are used for specific purposes

1. Circular saw:

These saws are used to cut materials at different angles. This type of saws is popular because they can be easily transported to different construction sites. They are also compatible with different blades. So you can set different types of blades in the saw which can cut through distinct materials from wood to stone to ceramics.

2. Miter saw:

These saws are equivalent to circular saws but specially designed to make precise angular cuts, notable for miter joints.

3. Jigsaw:

Jigsaws are used to make both straight and circular cuts.

4. Stationary:

Stationary saws can make cuts in a range of materials from woods to plastic to pipe. This tool also makes less noise which is suitable for residential areas. However, the disadvantages are this saw can’t make deep cutting and is not portable to the construction sites

5. Hand saw:

Hand saws are guided by the hand of the users, using the force of hand to power it. These saws are not powered by electricity , gas or any power sources. These are suitable for DIYs and small household tasks. There are different types of hand saw with many of them suitable for a variety of tasks.

Safety

Safety is a major concern while using a saw, especially if you are not a professional. Some saws are complex and therefore need expertise to use while others are very simple. When you use a saw, there are risks of kickback and mistakenly guiding the hand towards blade which cause serious injuries. That’s why these saws are becoming more popular amongst the carpenters and woodworker as these are more safe to use such as stationary saw. The best craftsman 137 table saw fence we have selected are well analyzed based on the safety issue.

Power Source

Different saws are powered using distinct power sources such as gasoline, electric and battery-powered. The task will decide which power you need, The most powerful saws are gasoline-fueled. As a rule of thumb, we can suggest that if you do it indoors, then opt for an electric corded saw. If you do work outdoors, pick a battery powered saw.

Sawdust collection system

Some saws are featured with a special vacuum cleaner which sucks all the dust particles. If you are very health concerned and want to keep your workplace clean, you can choose a saw with sawdust collection system

Price

Saw can be very expensive based on its features and applications . However, if you try a little bit, you can find a saw within your budget that is perfect for your needs. We consider the price and affordability while recommending the best craftsman 137 table saw fence.

Special features

The product quality is another important aspect to consider while choosing the right Saw. The smooth start, the trajectory of movement , having option for emergency shutdown and minimum safety standards are some features to look for before picking a specific one. In our best craftsman 137 table saw fence, we have thoroughly checked these things

Conclusion:

We have implement artificial intelligence to test and analyze thousands of products. After scrutinizing every aspect of the product from availability to precision to affordability , they provide us with a handful of best products which are most suitable for most of our readers. I hope this article about the best craftsman 137 table saw fence will help you to pick the right saw whether you are looking for outdoor construction work or trimming a big tree or simple indoor household task.

Leave a Comment