Craftright Clamp And Cutting Guide

If you are a carpenter or woodworker, you must have a range of SAWS in your arsenal. Not only do you need a saw for professional reasons, but you should have some essential lightweight saws for your household works. There are a wide variety of saws on the market and you don’t know which saws are the most convenient, safe, and effective, and make the most precise cuts. Figuring out the right tool for the right task is quite a daunting task.

If you don’t want to get your head around this, you can trust us as we have extensively tested and analyzed a wide variety of cutting machinery from a lot of quality hand saws to many different types of power saws. Whether you want saws that make straight cuts, curved cuts, or patterns, here we are reviewing the most effective, affordable, and easy-to-use craftright clamp and cutting guide with which you can easily get your job done and you will eventually get satisfied with whatever you are doing.

# Preview Product Score
1 Swanson Tool CG100 Cutting Guide 100-Inch 9.4
2 ProGrip Straight Edge Clamp Ideal for Cutting Large… 9.7
3 BORA 100″ NGX Clamp Edge, Straight Cut Guide… 9.4
4 BORA 50” NGX Clamp Edge, Straight Cut Guide… 9.4
5 Kreg KMA4700-E Straight Edge Guide XL-8 Ft 9.8
6 BORA WTX Ruled Clamp Edge Saw Guide, 50… 9.4
7 DCT Aluminum Pro Grip Clamp Straight Edge Wood… 9.8
8 Bora 100” WTX Ruled Clamp Edge Saw Guide… 9.4
9 Bora NGX Saw Plate Includes 55″ Non-Chip Strip… 9.4
10 BORA 4-piece WTX Deluxe Set, Straight Cut Guide… 9.4
1

Swanson Tool CG100 Cutting Guide 100-Inch

  • Includes two 50 in. cutting guides; joiner bar allows expansion to 100 in.
  • Low-profile design guides any circular saw, sabre saw, router, or utility knife
  • Made of durable, high-grade anodized aluminum
  • Includes C-clamps to easily attach to your work surface for stability when cutting
  • Break-down design makes for easy storage
  • A terrific value, backed by 1-year limited

2

ProGrip Straight Edge Clamp Ideal for Cutting Large Sheets of Plywood and Dado Slots (50 inch Clamp)

  • No more c-clamps when trying to secure a straight edge to your large or small wooden panels! Cut large panels, small panels, rout straight dado’s and more! ProGrip Straight Edge Guides are not only great straight edge guides, they are super easy to align and even easier to clamp into place. Made from extruded aluminum and with the extra wide 2-3/16 inch tube rail, the ProGrip Straight Edge Guide Clamps are robust guides that are made for everyday workshop or contractor use.
  • Cut straight, true lines with circular saws, routers, trim routers, jig saws and many other power tools you probably own. These clamps are ideal for cutting large sheets of plywood in half (with a 50” straight edge guide). Each clamp is identified by the maximum clamping distance between jaws. Another great application for these clamps is cutting dado slots for bookshelves. The alignment and cutting process for dados is so much easier than ever before with the ProGrip Straight Edge Guides.
  • Each clamp rail is manufactured with a low profile to make guiding your power tool along the edge much easier. The low profile has also been designed with guide accessories in mind. The clamp rails accept many different accessories (sold separately) or can create your very own jigs and fixtures to use with the ProGrip Straight Edge Guides. Each ProGrip Straight Edge Guide has the exact same profile regardless of length.
  • How does it work? Each ProGrip Straight Edge Guide Clamp has one adjustable jaw and one fixed jaw. The fixed jaw typically will go against the edge of the board closest to you. Once you place the clamp on your board with the fixed jaw over the end, the adjustable end gets drawn in against the opposite side of the board. Once set and aligned, you secure the clamp by simply locking it down with the 3 position lock lever.
  • The lock lever on each clamp can be secured into one of three positions, each position provides varying amounts of pressure. Depending on your project or application, you may need to apply more pressure by securing the lock lever to the appropriate position. Once secured, the ProGrip Straight Edge Guide Clamp is designed to have zero side to side play with minimal deflection to provide you with the ideal straight edge to make clean, smooth cuts every time!

3

BORA 100″ NGX Clamp Edge, Straight Cut Guide for Circular Saws, Includes 50-Inch Clamp Edge & 50-Inch Extension for 100-Inch Cutting Length, 544100

  • Clamping end moves with handle for easy adjustability from one side
  • Locking handle grabs work surfaces for a secure grip that won’t budge
  • Made of heavy-gauge, rigid aluminum for extreme durability
  • Use with circular saws, routers, Jig saws, and other portable power tools
  • Includes Bora NGX 50-inch clamp edge and Bora NGX 50-inch extension piece with connectors

4

BORA 50” NGX Clamp Edge, Straight Cut Guide for Circular Saws, Easy to Use, Great for Cross-Cutting Plywood Sheets and Routing Dados, 544050

  • Circular Saw Guide For Large Sheets: The Bora Clamp Edge is an ideal accessory for accurately cutting wide boards and pieces of plywood that are too big for a table saw
  • Clamps Firmly: This straight edge guide has a wide rubberized clamp face to ensure a tight non-slip grip that won’t leave indentations and is easily adjustable to meet the length of your project
  • Extreme Durability: Made of heavy-gauge, extruded aluminum, it is rigid enough to resist bowing and hold a straight edge, and durable enough to withstand repeated use
  • Use With Any Circular Saw: This guide is compatible with any brand of circular saw, not just Bora Tools. Use it with circular saws, routers, and jigsaws. For big projects, easily increase the length up to 100 in. by adding the Bora NGX 50-inch aluminum extension

5

Kreg KMA4700-E Straight Edge Guide XL-8 Ft

  • Crosscut and rip cut material up to 8 feet (244cm)
  • Aluminum guide rail leads cuts precisely along a straight line
  • Cutline indicators help position cuts perfectly

6

BORA WTX Ruled Clamp Edge Saw Guide, 50 Inch Length Rail for Circular Saws, Cutting Track for Woodworking, Contractors, DIY, 545050

  • Time Saver: The BORA WTX Ruled Clamp Edge Saw Guide makes it quick and easy to achieve straight, precise cuts when cutting plywood sheets or MDF with a circular saw, jigsaw, or router
  • Fast Set-Up: Adjust the gripping clamp end to the desired length, lock it in place, and start cutting
  • Long Cutting Length: This 50” guide rail is long enough for large and wide sheet material and can be used with all types of saws. Easily increase the length up to 100 inches by adding the BORA NGX 50-inch aluminum extension, sold separately.
  • Ruled Straight Edge: The top edge of the clamp includes a ruler imprint with both metric and imperial measurements to guarantee your cuts are always the right size
  • Extreme Durability: Made of heavy-gauge, extruded aluminum, it is rigid enough to resist bowing and hold a straight edge, and durable enough to withstand repeated use

7

DCT Aluminum Pro Grip Clamp Straight Edge Wood Cutting Table Saw Guide, 24in / 62cm – Circular, Rotary, Jig, Router

  • INSTANT STRAIGHT EDGE GUIDE: When you have limited workshop space, the DCT Aluminum Pro Grip Clamp Straight Edge Wood Cutting Table Saw Guide, 24” Inch / 62cm – Circular, Rotary, Jig, Router will save you the space required for cutting/panel gluing and is capable of clamping to any parallel edge workpiece with low profile jaws that allow you to use the clamp inverted and have an unobstructed work area
  • ALL-IN-ONE: You get a smooth, straight edge and a woodworking self-clamping tool in one handy unit so you can stack glue panels without worrying about them tipping and crashing to the floor; 30.5” x 2.1” x 0.5” inches (77.5cm x 5.3cm x 1.3cm) overall dimensions (stands 1.1 inches/2.8cm tall) with 2.5” x 1” x 0.25” inch (6.4cm x 2.5cm x 0.6cm) clamp
  • BUILT TO LAST: Constructed with an aluminum body and reinforced with integral tube running the length of the wide body for maximum rigidness and lightweight handling; Wide and tall hard plastic jaws hold work piece securely and are predrilled for accessory; When clamped, this solid guide shows no play and it tightly holds its grip
  • WIDE RANGE: Scale includes both inches and centimeter measurements and is adjustable to work over the full range up to 24 inches/62cm; T-track on guide accepts standard accessories including all Pro Grip accessories and also allows complete flexibility when designing specialty fixtures in your shop; Low profile and flat top easy on a rotary saw, jig saw, circular table saw, router straight cut, or joiner cut
  • EASY TO USE: There are two clamps that hold the wood – a stationery clamp on the end with lever and a sliding clamp that moves along the rail; To adjust, pull the sliding clamp apart until you hear a click, adjust the clamp to the wood, hold the clamp against the wood and push the other part of the clamp towards the wood until it locks, make sure the stationary clamp has the handle in the upward position when adjusting and push the lever down to lock into place

8

Bora 100” WTX Ruled Clamp Edge Saw Guide for Woodworking, Contractors, Carpenters and DIY, Guide for Circular Saws, 100 Inch Cutting Length, 545100

  • Get It Straight Every Time: This rigid aluminum guide rail is a must-have accessory for keeping your cutting on track. It’s long 100-inch length allows you to saw with precision and skill
  • Locked In: The adjustable clamp end slides up and down the saw guide to fit any material being cut, especially sheets of plywood. The locking handle grabs surfaces for a secure edge that won’t budge while you cut
  • Make Measuring Easy: The WTX Clamp Edge has a ruled edge with both metric and imperial measurements to make your job of getting perfect cuts quick and easy
  • Suited For Your Needs: The modular design allows for additional extensions to be added to expand your cutting length up to 100 inches. With the WTX clamping edge, you’ll save time and eliminate waste due to crooked, uneven cuts
  • Additional Accessories: The BORA WTX Saw Guide System has additional accessories including the Saw Plate, Track Clamps for cutting any angle, and the Router Guide
  • 100 Inches Of Cutting: With your purchase you will receive a 50″ WTX Clamp Edge and WTX 50″ Extension, connect the pieces together for 100 inches of straight cuts

9

Bora NGX Saw Plate Includes 55″ Non-Chip Strip That Elimates Tear Out, Designed for Straight Cuts While Using The NGX Clamp Edge System, 544001

  • Fixed Center Molded Channel Reduces Blade Offset And Guesswork
  • Self-Adhesive Non-Chip Strip Attaches To The Bottom Of Your Ngx Clamp Edge And Reduces Top Edge Tear-Out For A Smooth Finish
  • Quick-Release Clamps Are Adjustable So Your Saw Goes On And Off The Plate Effortlessly
  • Aluminum Guide Rails Position Your Saw Accurately Every Time

10

BORA 4-piece WTX Deluxe Set, Straight Cut Guide for Circular Saws, Includes 24-Inch & 50-Inch WTX Clamp Edges, 50-Inch Extension, Saw Plate, 545410

  • Includes 24-inch & 50-inch WTX Clamp Edges, 50″ Extension with connectors, Saw Plate
  • WTX Clamp Edge is made of heavy-gauge, extruded aluminum for extreme durability
  • Adjustable channel on saw plate fits a wide variety of straight edges up to 3.5” wide
  • Fits right- and left-handed circular saws
  • Ruled extrusion allows for easy measurements
  • Locking handle grabs work surfaces for a secure edge that won’t budge
  • **Replacement set for BORA 543400 4-piece set

Saws are expensive and most people are afraid of this fact. We successfully enlisted a few craftright clamp and cutting guide that are not only great for efficiency and precision, but they are the most affordable and budget-friendly saws you will ever get. Moreover, these saws can get your job done more quickly than any ordinary saws you will find on the market. Some are even portable and compact which can be easily brought to the Jobsite. Choosing the right craftright clamp and cutting guide takes all the efforts and hard work, we have done it all for you. Check out the saws that we have chosen for you.

Buying guide

Before buying any typical saw, one must look for some facts to find the most perfect saw of his kind. Because when you are alone searching for a saw, chances are really high that you can get deceived by not knowing some important information. If you have that information beforehand, things can be easy for you to find the best craftright clamp and cutting guide of your kind. Here are some factors to consider before buying the best craftright clamp and cutting guide.

Specific task

All the saws are not made equal and which saw you need is determined by the task you do. However, some saws are versatile that can be used for multiple applications. Here in this guide of the best craftright clamp and cutting guide , we have recommended the saws with which you can make straight cuts and angular cuts as well. Below are some types of saws which are used for specific purposes

1. Circular saw:

These saws are used to cut materials at different angles. This type of saws is popular because they can be easily transported to different construction sites. They are also compatible with different blades. So you can set different types of blades in the saw which can cut through distinct materials from wood to stone to ceramics.

2. Miter saw:

These saws are equivalent to circular saws but specially designed to make precise angular cuts, notable for miter joints.

3. Jigsaw:

Jigsaws are used to make both straight and circular cuts.

4. Stationary:

Stationary saws can make cuts in a range of materials from woods to plastic to pipe. This tool also makes less noise which is suitable for residential areas. However, the disadvantages are this saw can’t make deep cutting and is not portable to the construction sites

5. Hand saw:

Hand saws are guided by the hand of the users, using the force of hand to power it. These saws are not powered by electricity , gas or any power sources. These are suitable for DIYs and small household tasks. There are different types of hand saw with many of them suitable for a variety of tasks.

Safety

Safety is a major concern while using a saw, especially if you are not a professional. Some saws are complex and therefore need expertise to use while others are very simple. When you use a saw, there are risks of kickback and mistakenly guiding the hand towards blade which cause serious injuries. That’s why these saws are becoming more popular amongst the carpenters and woodworker as these are more safe to use such as stationary saw. The best craftright clamp and cutting guide we have selected are well analyzed based on the safety issue.

Power Source

Different saws are powered using distinct power sources such as gasoline, electric and battery-powered. The task will decide which power you need, The most powerful saws are gasoline-fueled. As a rule of thumb, we can suggest that if you do it indoors, then opt for an electric corded saw. If you do work outdoors, pick a battery powered saw.

Sawdust collection system

Some saws are featured with a special vacuum cleaner which sucks all the dust particles. If you are very health concerned and want to keep your workplace clean, you can choose a saw with sawdust collection system

Price

Saw can be very expensive based on its features and applications . However, if you try a little bit, you can find a saw within your budget that is perfect for your needs. We consider the price and affordability while recommending the best craftright clamp and cutting guide.

Special features

The product quality is another important aspect to consider while choosing the right Saw. The smooth start, the trajectory of movement , having option for emergency shutdown and minimum safety standards are some features to look for before picking a specific one. In our best craftright clamp and cutting guide, we have thoroughly checked these things

Conclusion:

We have implement artificial intelligence to test and analyze thousands of products. After scrutinizing every aspect of the product from availability to precision to affordability , they provide us with a handful of best products which are most suitable for most of our readers. I hope this article about the best craftright clamp and cutting guide will help you to pick the right saw whether you are looking for outdoor construction work or trimming a big tree or simple indoor household task.

Leave a Comment