Best Circular Saw Blade For Ripping

Changing a circular saw blade is not as hard as you might have been thinking. However, it can be a cause of serious injury if you don’t know how to change a circular saw blade properly. Don’t be troubled, as I’m going to show you the steps in a moment. Additionally, I will also give you a gist of best circular saw blade for ripping.

# Preview Product Score
1 DEWALT Circular Saw Blade, 8 1/4 Inch, 24… 9.4
2 OA-BRES 7-1/4-Inch 40-Tooth Circular Saw Blade with 5/8-Inch… 9.7
3 IRWIN Tools MARATHON Carbide Corded Circular Saw Blade,… 9.4
4 Ripping & Framing Carbide Tipped Circular Saw Blades… 8.5
5 BOSCH DCB624 Daredevil 6-1/2-Inch 24-Tooth Framing Ripping Corded/Cordless… 9.4
6 Metabo HPT Circular Saw Blades, 7-1/4”, 24T Framing/Ripping… 9.4
7 DEWALT Circular Saw Blade, 8 1/4 Inch, 40… 9.4
8 Freud D0724PX Diablo ATB Framing and Ripping Carbide… 10.0
9 Metabo HPT Circular Saw Blade, 7-1/4″, 24T, Framing/Ripping,… 9.4
10 BOSCH DCB1024 10 In. 24 Tooth Daredevil Table… 9.4
1

DEWALT Circular Saw Blade, 8 1/4 Inch, 24 Tooth, Framing & Ripping (DWA181424)

  • Exclusive, patent-pending toughtrack tooth design for accurate tracking over the life of the blade
  • Made from high-density tungsten Carbide for toughness, wear-resistance, and long life
  • Tough coat anti-stick coating reduces friction and gumming
  • Thin kerf design for smooth cuts
  • Reinforced shoulder for impact resistance in nail-embedded wood

2

OA-BRES 7-1/4-Inch 40-Tooth Circular Saw Blade with 5/8-Inch Arbor, TCT ATB Ripping / Cross Cutting Blade for Wood Cutting (2-Pack)

  • DIMENSIONS: 2 PACK 7-1/4 Inch 40T Ripping & Crosscutting Saw Blade, 5/8 inch Arbor, with a nice storage case.
  • DURABLE: OA-BRES circular saw blades are made of durable premium alloy steel material, with hardened and sharper construction-grade tungsten carbide teeth for effective woodworking. Fully Polished and Chrome Plated Surface provides a long-lasting usage life.
  • EFFECTIVE: Incorporates an ATB (Alternating Top Bevel) offset tooth design, sharp saw blade cutters with thin kerf ensure smooth, fast and accurate cutting with impressive results.
  • APPLICATING: General purpose Hard & Soft wood cutting saw blade. for long-lasting cuts in plywood, chipboard, multi-board, panels, MDF,plated&counted-plated panels, laminated&Bi-laminate plastic, and FRP.
  • COMPATIBILITY: Can used in corded and cordless circular saws, miter saw and table saw.

3

IRWIN Tools MARATHON Carbide Corded Circular Saw Blade, 7 1/4-inch, 24T (24030)

  • CSB MARATHON 7-1/4″ 24T BULK DISPLY T
  • CSB MARATHON 7-1/4″ 24T BULK DISPLY T
  • CSB MARATHON 7-1/4″ 24T BULK DISPLY T
  • CSB MARATHON 7-1/4″ 24T BULK DISPLY T
  • CSB MARATHON 7-1/4″ 24T BULK DISPLY T
  • Silicone coat allows the blade to slice easier through material reducing pitch and resin buildup when cutting pressure-treated lumber.
  • Construction-grade carbide teeth deliver longer blade life. Every other tooth is thinner for faster cuts.
  • The innovative heat vent/expansion slot design reduces vibration for longer life and straighter cuts. Plate is fully hardened to run truer, longer.
  • 24 tooth count blades are ideally suited for framing, ripping, and deck jobs.

4

Ripping & Framing Carbide Tipped Circular Saw Blades 75718

  • For wood cutting
  • Ripping and framing blade
  • Last up to 50 times longer than standard steel blades
  • 16 mm arbor
  • 7-1/4″ blade diameter

5

BOSCH DCB624 Daredevil 6-1/2-Inch 24-Tooth Framing Ripping Corded/Cordless Circular Saw Blade

  • Brute Carbide – an upgraded C3/C4 micro grain formulation for increased impact damage resistance
  • ATB tooth geometry – for fast cross cutting, cutoff and trim of wood and plywood
  • SpeedCoat – an antifriction finish for faster cutting with no burning or melting
  • Thinner kerf – provides faster cuts and less waste
  • Extra-hard steel blade body – delivers accuracy and resists bending and deflection for true cuts
  • Edge blades – developed for extreme performance for specific material and application
  • Quality manufacturing – features the best materials and innovative engineering

6

Metabo HPT Circular Saw Blades, 7-1/4”, 24T Framing/Ripping VPR Blades, High Performance Micro Grain Tungsten Carbide, 5/8″ Diamond Arbor, 3-Pack (115430M)

  • Same Accessories. New name. Hitachi Power Tools has renamed to Metabo HPT
  • Ideal for rough framing lumber, plywood, softwood, OSB, and hardboard siding
  • Laser-cut expansion slots are silicone-filled to reduce vibration and noise
  • 5/8” diamond arbor
  • 8000 max RPM

7

DEWALT Circular Saw Blade, 8 1/4 Inch, 40 Tooth, Cross Cutting (DWA181440)

  • Made from high-density tungsten Carbide for toughness, wear-resistance, and long life
  • Tough coat anti-stick coating reduces friction and gumming
  • Thin kerf design for smooth cuts
  • Reinforced shoulder for impact resistance in nail-embedded wood
  • Optimized for use on both corded and cordless circular saws

8

Freud D0724PX Diablo ATB Framing and Ripping Carbide Circular Saw Blade with 5/8-Inch Arbor, 2-Pack

  • 7-1/4″x24 tooth framing and construction blade
  • Blades have laser cut bodies, with perma-shield coating to prevent corrosion, and gumming. Will fit most 7-1/4″ circular saws and worm drive saws.
  • Laser cut anti vibration design
  • Re-sharpenable up to six(6) times
  • Made with High Density Carbide

9

Metabo HPT Circular Saw Blade, 7-1/4″, 24T, Framing/Ripping, VPR Blade w/Tungsten Carbide Tips (115429M)

  • Same fasteners. New name. Hitachi power tools has renamed to Metabo HPT
  • 7-1/4″ Diameter
  • 5/8″ Diamond Arbor
  • 8000 Max RPM

10

BOSCH DCB1024 10 In. 24 Tooth Daredevil Table and Miter Saw Blade Fast Ripping

  • Blade is 10 In. with 24 teeth for ripping applications
  • For use on soft and hard wood, plywood and other building materials
  • Triple-sharp Bosch C4 Micrograin carbide teeth provide smooth cuts, excellent finish and long life
  • Speed Coat finish means less friction and pitch buildup for fast, effortless cutting in treated or wet lumber
  • 5/8 In. arbor

Before I start showing the circular saw blade replacement steps, let me tell in short about different circular saw blade types.

  • Combination blades
  • Crosscutting blades
  • Ripping blades
  • Dado blades
  • Plywood blades
  • Hollow ground blades
  • Thin Kerf blades
  • Abrasive blades
  • Continuous Rim/Diamond blades
  • Turbo Rim blades

Different Types of Circular Saw Blades

Combination Blades

This kind of best circular saw blade for ripping is a good fit for different DIY enthusiasts as it offers versatile use with a simple design. When you don’t need too much perfection, you can use a combination blade. Typically, you will want to cut things like hardwoods, softwoods, wood grains with this sort of blades.

Crosscutting Blades

This type of blades typically has around 48 small gullets teeth to cut across the object like wood grain smoothly. However, a crosscutting blade is a good option for only short wood grain.

Ripping Blades

The use of ripping blades is almost similar to the crosscutting blades. I mean, both of them are used to cut across the wood grain. However, ripping blades are suitable for cutting long wood grains, and they have fewer teeth with larger gullets than crosscutting blades.

Dado Blades

If you want to cut grooves of different widths, then the dado blade is the type you should go for. You will find two types of dado blades – stacked dado blades, and wobble dado blades. Stacked dado blades have two circular saw blades, some chipper blades, and shims stacked together.

On the other hand, wobble dado blades consist of a simple circular blade mounted on an adjustable hub.

Plywood Blades

The name says it all. This type of blade is mainly used to cut plywood. Plywood blades typically have around 100 teeth and small gullets that helps to deal with plywood cutting effortlessly.

Dremel Ultra-saw (US40) is a perfect tool to fit this kind of plywood blade to cut plywood.

Hollow Ground Blades

Hollow ground blades are made to cut coated boards like plywood smoothly. One of the main differences between a plywood blade and a hollow ground blade is, the later one has a thinner body than the teeth. It helps to turn aside the binding. Hollow ground blades are also used to cut across the wood grains.

Thin Kerf Blades

Thin Kerf blades are used to cut small wood pieces, that’s why it’s a handy option for cutting dimensional or engineered lumber. The word ‘kerf’ means the cut width. So, as you are guessing, thin kerf means narrow cutting here. Don’t use this type of blade to cut stricter wood.

Abrasive Blades

This type of blade doesn’t have teeth to cut the materials. It uses abrasive materials like silicon carbide or aluminum oxide to cut materials like tiles, concrete, masonry, brick, or steel.

Continuous Rim/Diamond blades

Diamond blades serve almost the same purpose as the abrasive blades do. That means this type of blade is also the right choice for cutting materials like tiles, ceramic, glass, concrete, etc. Diamond blades offer a much cleaner finish than an abrasive blade.

Rotorazer and some of its alternatives are some of the right fits for this kind of diamond blades.

Turbo Rim Blades

Turbo rim blades look pretty similar to the continuous rim blades. But these blades cut more aggressively than the continuous rim blades. Nonetheless, turbo rim blades don’t offer clean finish, that a continuous rim blade can to do. It is used to cut materials like concrete, brick, etc.

How to change the best circular saw blade for ripping

You must change a circular saw blade if you are finding difficulties in cutting the materials or if you find the edge isn’t sharp anymore. Nevertheless, changing a circular saw blade is a pretty straightforward process and can be done in a quick time.

  • First and foremost, you have to unplug the unit if you are using the standard saw. If you are using a cordless circular saw, then remove the battery. The idea here is to avoid any accidental firing up of the machine when you are changing the best circular saw blade for ripping.
  • Second, press the spindle lock button that is located near the blade guard, and then turn the blade until you see it engaged. That means turn the blade until it stops turning.
  • Next, loosen the bolt.
  • Then unscrew the bolt to remove it. Also, remove washers if there is any.
  • Next, pull the lower blade guard and move it out of the way.
  • Now, remove the blade.
  • After that, place the new blade keeping the blade face in the right direction. You have to match the direction of the arrow on the blade body and the arrow on the blade guard.
  • Then place the washer and bolts and tighten them again. 
  1. Can I cut steel with a circular saw?
  • Yes, you can cut steel with a circular saw. You just have to use the appropriate blade in this case. An excellent abrasive blade will do the work.
  1. Is it possible to sharpen the circular saw blade?
  • Yes, it is possible to sharpen the best circular saw blade for ripping. You can use any hand file or an automatic file to sharpen a steel-toothed blade. If it’s a carbide-tipped, then better take it to the professional sharpening service because it requires a diamond wheel sharpener to get things done when it’s a carbide-tipped blade.
  1. How to know when I need to replace the circular saw blade?
  • When you see the blade is chipping the wood instead of cutting the wood, it’s time to replace the blade because your blade is dull at this point.

Final Verdict

In this article, I’ve given you an idea about different circular saw blade types. Then I mentioned the different steps involved in changing best circular saw blade for ripping. Finally, I answered some of the frequently asked questions. Please make sure to buy the right size blade for the saw you are using and always wear safety gear when you operate the saw.

Leave a Comment