Best Circular Saw Blade For Oak Doors

Changing a circular saw blade is not as hard as you might have been thinking. However, it can be a cause of serious injury if you don’t know how to change a circular saw blade properly. Don’t be troubled, as I’m going to show you the steps in a moment. Additionally, I will also give you a gist of best circular saw blade for oak doors.

# Preview Product Score
1 Freud D0760A Diablo 7-1/4″ x 60-Tooth Ultra Fine… 9.8
2 Freud D0536X Diablo 5-3/8-Inch 36 Tooth ATB Finish… 9.5
3 WEN BL1060 10-Inch 60-Tooth Fine-Finish Professional Woodworking Saw… 9.4
4 Circular Saw Blade, 40 Teeth, Wood 9.4
5 WEN BL1040 10-Inch 40-Tooth Carbide-Tipped Professional Woodworking Saw… 9.4
6 TWIN-TOWN 7-1/4-Inch Saw Blade, 60 Teeth,General Purpose for… 9.7
7 Freud D0740X ATB Finishing Saw Blade, multi,”7-1/4″”” 9.8
8 Oshlun SBW-100060N 10-Inch 60 Tooth Negative Hook Finishing… 9.4
9 RUITOOL Japanese Hand Saw 6 Inch Double Edge… 9.7
10 ALATIN Grinder Wood Carving Disc,4” or 4″-1/2″ Angle… 8.8
1

Freud D0760A Diablo 7-1/4″ x 60-Tooth Ultra Fine Finishing Circular Saw Blade with 5/8″ Arbor and Diamond Knockout Single Blade

  • 7-1/4X60 BULK DIABLO
  • 7-1/4X60 BULK DIABLO
  • 7-1/4X60 BULK DIABLO
  • 7-1/4X60 BULK DIABLO
  • 7-1/4X60 BULK DIABLO
  • 7-1/4″ Diameter 5/8″ Arbor with Diamond Knockout 0.059″
  • 7-1/4″ 60T Diablo Ultra Finish Work Table Saw BladeThe Diablo Ultra Finish
  • Used in miter saws or table saws,

2

Freud D0536X Diablo 5-3/8-Inch 36 Tooth ATB Finish Cordless Trim Saw Blade

  • Durable product
  • This product meets the customer requirements
  • Manufactured in Italy
  • Laser cut Stabilizer vents trap noise and vibration keeping it cool and reducing blade warp
  • Laser cut heat expansion slots allow blade to expand due to heat build-up keeping the cut true and straight
  • Durable micro grain titanium carbide for extreme durability, razor-sharp cuts, and long life
  • Tri-metal shock resistant brazing allows Carbide tips to withstand extreme impact for maximum durability
  • Laser cut arbor for accurate blade rotation reducing vibration and premature wear
  • Laser cut stabilizer vents trap noise and vibration keeping it cool and reducing blade warp
  • Laser cut heat expansion slots allow blade to expand due to heat build-up keeping the cut true and straight
  • Durable micrograin titanium carbide for extreme durability, razor-sharp cuts, and long life
  • Tri-metal shock resistant brazing allows carbide tips to withstand extreme impact for maximum durability
  • Laser cut arbor for accurate blade rotation reducing vibration and premature wear

3

WEN BL1060 10-Inch 60-Tooth Fine-Finish Professional Woodworking Saw Blade for Miter Saws and Table Saws

  • Featuring a 10-inch diameter (254 mm), a 5/8-inch arbor (15.88 mm) and a rating of up to 6000 RPM
  • Perfect for slicing through both hard and softwoods of all kinds
  • Ultra-thin 1/10-inch kerf (2.4 mm) provides clean and efficient cuts
  • Designed with 60 carbide-tipped teeth for fine-finish wood cutting
  • Compatible with the majority of 10-inch miter saws, jobsite saws, and table saws

4

Circular Saw Blade, 40 Teeth, Wood

  • 40 Tungsten carbide-tipped teeth
  • 1/8″ Kerf
  • Rake angle 15°
  • Titanium coating for extended wear and smoother, more accurate cuts
  • Top angle 10°

5

WEN BL1040 10-Inch 40-Tooth Carbide-Tipped Professional Woodworking Saw Blade for Miter Saws and Table Saws

  • Featuring a 10-inch diameter (254 mm), a 5/8-inch arbor (15.88 mm) and a rating of up to 6000 RPM
  • Perfect for slicing through both hard and softwoods of all kinds
  • Ultra-thin 1/10-inch kerf (2.4 mm) provides clean and efficient cuts
  • Designed with 40 carbide-tipped teeth for general-purpose wood cutting
  • Compatible with the majority of 10-inch miter saws, jobsite saws, and table saws

6

TWIN-TOWN 7-1/4-Inch Saw Blade, 60 Teeth,General Purpose for Soft Wood, Hard Wood, Chipboard & Plywood, 5/8-Inch DMK Arbor

  • Real industry quality level with elegant and simple design, C4 construction grade tungsten carbide teeth provide maximum resistance for 3X longer life
  • Ideal for ripping & crosscutiing in softwood, hardwood, chip board and plywood with fine finishing
  • For use on Circular Saws, Miter Saws and Table Saws, Max RPM 8,300
  • 1.8mm thin kerf design for fast cut and smooth cutting action allows extremely durable with minimal material waste
  • Laser cut stabilizer vents trap noise and vibration keeping the blade cool and reducing blade warp

7

Freud D0740X ATB Finishing Saw Blade, multi,”7-1/4″””

  • The product is 7-1/4x40T Diablo Blade
  • Easy to use
  • The product is manufactured in Italy
  • Features Freud’s TiCo Hi-Density Carbide with Titanium for long life and a flawless finish
  • Super thin laser cut kerf gives extremely fast, durable, and clean cuts
  • Non-stick Perma-Shield Coating reduces gumming, rusting, and corrosion – ideal for decks
  • Laser-cut stabilizer vents trap noise and vibration keeping the blade cool and reducing blade warp
  • Laser-cut blade plate for true cuts
  • Features Freud’s TiCo Hi-Density Carbide with Titanium for long life and a flawless finish
  • Super thin laser cut kerf gives extremely fast, durable, and clean cuts
  • Non-stick Perma-Shield Coating reduces gumming, rusting, and corrosion – ideal for decks
  • Laser-cut stabilizer vents trap noise and vibration keeping the blade cool and reducing blade warp
  • Laser-cut blade plate for true cuts

8

Oshlun SBW-100060N 10-Inch 60 Tooth Negative Hook Finishing ATB Saw Blade with 5/8-Inch Arbor for Sliding Miter and Radial Arm Saws

  • Thin Kerf for Fast Cuts
  • Negative Hook Angle
  • Professional Grade C-4 Carbide
  • Anti-Vibration Slots

9

RUITOOL Japanese Hand Saw 6 Inch Double Edge Sided Pull Saw Ryoba SK5 Flexible Blade 14/17 TPI Flush Cut Beech Handle Wood Saw for Woodworking Tools

  • 【Durable & Flexible Saw Blade】: The hand saw blade is made of SK5 high-carbon steel. The Japanese pull saw teeth are processed by a high-frequency hardening machine imported from Japan, and the hardness can reach HRC60-63 degrees.
  • 【Double Edged】: One side of Japanese hand saw is 17TPI for cutting hardwood, and the other side is 14TPI for cutting softwood.
  • 【Hardened 3-Edge Teeth】: The hand saw has three-sided grinding gear design, sharp edge, faster chip removal, and smoother cutting.
  • 【Comfortable Handle】: Exquisite beech wood handle and slight curve design make the saw handle comfortable to hold, and the operation is more labor-saving.
  • 【Enrich Your Woodworking Life】: Straight shank double-sided small hand saw, small and light, suitable for fine cutting and small parts production, it is the best choice for woodworking DIY.

10

ALATIN Grinder Wood Carving Disc,4” or 4″-1/2″ Angle Grinder,Chainsaw Grinding Wheel China Blade Circular Plate 5/8′ Arbor,Shaping and Cutting Disk with 22 Teeth (100mm) 2PCS

  • PROFESSIONAL ANGLE GRINDER – Arbor size : 5/8″ (16mm), diameter: 4″, suitable for 4″ (100mm) or 4-1 / 2in (115mm) wood grinder disc. Speed: 10000-13000 rpm, maximum 14000 rpm.
  • WIDE RANGE OF APPLICABILITY – Our angle grinder disc saws are extremely operability, easy to complete cutting, carving wood, stone, metal, plastic, ice and hard rubber. Ideal for curved work such as the inside of the bowl, cutting discs, measuring and guiding.
  • EXQUISITE CRAFTSMANSHIP – First-class quality, compared with the traditional wood carving disc, for you to save complex operation, not need to be replaced. Made of high-quality steel, it offers excellent durability and wear resistance, high precision and 22 teeth to provide a smooth surface, to meet your needs.
  • EASY TO USE – This carving disc for angle grinder is firmly fixed between two steel plates and can be easily carved and cut. It provides excellent grip, high safety factor, compact design, and easy storage. Great convenience!
  • WARM TIPS – Before use the grinder saw disc, please read the instruction manual carefully to ensure correct installation. It is not recommended to use the switch interlock function on the grinder to avoid injury. We provide 24-hour online technical support.

Before I start showing the circular saw blade replacement steps, let me tell in short about different circular saw blade types.

  • Combination blades
  • Crosscutting blades
  • Ripping blades
  • Dado blades
  • Plywood blades
  • Hollow ground blades
  • Thin Kerf blades
  • Abrasive blades
  • Continuous Rim/Diamond blades
  • Turbo Rim blades

Different Types of Circular Saw Blades

Combination Blades

This kind of best circular saw blade for oak doors is a good fit for different DIY enthusiasts as it offers versatile use with a simple design. When you don’t need too much perfection, you can use a combination blade. Typically, you will want to cut things like hardwoods, softwoods, wood grains with this sort of blades.

Crosscutting Blades

This type of blades typically has around 48 small gullets teeth to cut across the object like wood grain smoothly. However, a crosscutting blade is a good option for only short wood grain.

Ripping Blades

The use of ripping blades is almost similar to the crosscutting blades. I mean, both of them are used to cut across the wood grain. However, ripping blades are suitable for cutting long wood grains, and they have fewer teeth with larger gullets than crosscutting blades.

Dado Blades

If you want to cut grooves of different widths, then the dado blade is the type you should go for. You will find two types of dado blades – stacked dado blades, and wobble dado blades. Stacked dado blades have two circular saw blades, some chipper blades, and shims stacked together.

On the other hand, wobble dado blades consist of a simple circular blade mounted on an adjustable hub.

Plywood Blades

The name says it all. This type of blade is mainly used to cut plywood. Plywood blades typically have around 100 teeth and small gullets that helps to deal with plywood cutting effortlessly.

Dremel Ultra-saw (US40) is a perfect tool to fit this kind of plywood blade to cut plywood.

Hollow Ground Blades

Hollow ground blades are made to cut coated boards like plywood smoothly. One of the main differences between a plywood blade and a hollow ground blade is, the later one has a thinner body than the teeth. It helps to turn aside the binding. Hollow ground blades are also used to cut across the wood grains.

Thin Kerf Blades

Thin Kerf blades are used to cut small wood pieces, that’s why it’s a handy option for cutting dimensional or engineered lumber. The word ‘kerf’ means the cut width. So, as you are guessing, thin kerf means narrow cutting here. Don’t use this type of blade to cut stricter wood.

Abrasive Blades

This type of blade doesn’t have teeth to cut the materials. It uses abrasive materials like silicon carbide or aluminum oxide to cut materials like tiles, concrete, masonry, brick, or steel.

Continuous Rim/Diamond blades

Diamond blades serve almost the same purpose as the abrasive blades do. That means this type of blade is also the right choice for cutting materials like tiles, ceramic, glass, concrete, etc. Diamond blades offer a much cleaner finish than an abrasive blade.

Rotorazer and some of its alternatives are some of the right fits for this kind of diamond blades.

Turbo Rim Blades

Turbo rim blades look pretty similar to the continuous rim blades. But these blades cut more aggressively than the continuous rim blades. Nonetheless, turbo rim blades don’t offer clean finish, that a continuous rim blade can to do. It is used to cut materials like concrete, brick, etc.

How to change the best circular saw blade for oak doors

You must change a circular saw blade if you are finding difficulties in cutting the materials or if you find the edge isn’t sharp anymore. Nevertheless, changing a circular saw blade is a pretty straightforward process and can be done in a quick time.

  • First and foremost, you have to unplug the unit if you are using the standard saw. If you are using a cordless circular saw, then remove the battery. The idea here is to avoid any accidental firing up of the machine when you are changing the best circular saw blade for oak doors.
  • Second, press the spindle lock button that is located near the blade guard, and then turn the blade until you see it engaged. That means turn the blade until it stops turning.
  • Next, loosen the bolt.
  • Then unscrew the bolt to remove it. Also, remove washers if there is any.
  • Next, pull the lower blade guard and move it out of the way.
  • Now, remove the blade.
  • After that, place the new blade keeping the blade face in the right direction. You have to match the direction of the arrow on the blade body and the arrow on the blade guard.
  • Then place the washer and bolts and tighten them again. 
  1. Can I cut steel with a circular saw?
  • Yes, you can cut steel with a circular saw. You just have to use the appropriate blade in this case. An excellent abrasive blade will do the work.
  1. Is it possible to sharpen the circular saw blade?
  • Yes, it is possible to sharpen the best circular saw blade for oak doors. You can use any hand file or an automatic file to sharpen a steel-toothed blade. If it’s a carbide-tipped, then better take it to the professional sharpening service because it requires a diamond wheel sharpener to get things done when it’s a carbide-tipped blade.
  1. How to know when I need to replace the circular saw blade?
  • When you see the blade is chipping the wood instead of cutting the wood, it’s time to replace the blade because your blade is dull at this point.

Final Verdict

In this article, I’ve given you an idea about different circular saw blade types. Then I mentioned the different steps involved in changing best circular saw blade for oak doors. Finally, I answered some of the frequently asked questions. Please make sure to buy the right size blade for the saw you are using and always wear safety gear when you operate the saw.

Leave a Comment