Best Circular Saw Blade For General Use

Changing a circular saw blade is not as hard as you might have been thinking. However, it can be a cause of serious injury if you don’t know how to change a circular saw blade properly. Don’t be troubled, as I’m going to show you the steps in a moment. Additionally, I will also give you a gist of best circular saw blade for general use.

# Preview Product Score
1 Makita 721003-8 3-3/8″ 50T Steel Circular Saw Blade,… 9.4
2 Makita 721005-A 3-3/8″ 24T Carbide-Tipped Circular Saw Blade,… 9.4
3 Makita A-85092 6-1/2″ 24T Carbide-Tipped Circular Saw Blade,… 9.6
4 Makita D-67022 6-1/2″ 24T Carbide-Tipped Circular Saw Blade,… 9.4
5 Makita D-45989 7-1/4″ 24T Carbide-Tipped Circular Saw Blade,… 9.8
6 Benchmark Abrasives 3-3/8″ 24 Tooth, TCT Wood Cutting… 9.7
7 Bosch CBCL1260M 12 In. 60 Tooth Edge Cordless… 9.4
8 Concord Blades WCB1200T040HP 12-Inch 40 Teeth TCT General… 9.7
9 BOSCH DCB1040 Daredevil 10-Inch 40-Tooth General Purpose Circular… 9.4
10 Bosch CBCL1024T 10 In. 24 Tooth Edge Cordless… 9.4
1

Makita 721003-8 3-3/8″ 50T Steel Circular Saw Blade, General Purpose

  • 50 tooth design for clean efficient cutting
  • Durable steel construction
  • Specially designed for cordless saws to permit more cuts per charge
  • For use with Makita 3-3/8″ Cordless Circular Saw

2

Makita 721005-A 3-3/8″ 24T Carbide-Tipped Circular Saw Blade, General Purpose

  • Fully hardened and expertly hand-tensioned steel saw plates for true cuts
  • Carbide tooth design for quality cuts and longer life
  • Specially designed for cordless saws to permit more cuts per charge
  • For use with Makita 3-3/8″ Cordless Circular Saw

3

Makita A-85092 6-1/2″ 24T Carbide-Tipped Circular Saw Blade, General Purpose

  • Ultra-thin kerf carbide-tipped design provides smoother cuts with less drag on the motor and minimal material loss
  • Specially designed for cordless saws to permit more cuts per charge
  • Fully hardened and expertly hand-tensioned steel saw plates for true cuts
  • For use with 6-1/2″ Cordless Circular Saws with 5/8″ arbor

4

Makita D-67022 6-1/2″ 24T Carbide-Tipped Circular Saw Blade, General Purpose

  • Ultra-thin kerf carbide-tipped design provides smoother cuts with less drag on the motor and minimal material loss
  • Specially designed for cordless saws to permit more cuts per charge
  • Fully hardened and expertly hand-tensioned steel saw plates for true cuts
  • For use with 6-1/2″ Cordless Circular Saws with 5/8″ arbor

5

Makita D-45989 7-1/4″ 24T Carbide-Tipped Circular Saw Blade, Framing/General Purpose

  • ATAF (Alternate Top and Alternate Face) Tooth Design for precision cutting
  • Fully hardened and expertly tensioned plate for true cuts
  • Ultra-thin kerf carbide-tipped design provides smoother cuts with less drag on the motor and minimal material loss
  • Large expansion slots for reduced noise and vibration
  • Laser cut heat vents engineered to dissipate heat

6

Benchmark Abrasives 3-3/8″ 24 Tooth, TCT Wood Cutting Saw Blade for General Purpose Cutting & Trimming of Softwoods, Hardwoods, Long Lasting Blades, Use with Circular Saw (3-3/8″ 24T)

  • Benchmark Abrasives 3-3/8″ TCT saw blade with 24 Teeth is excellent for general purpose cutting and trimming of softwoods and hardwoods. Ideal for occasional cutting of plywood, wood framing, decking, etc.
  • The strong and durable design of our saw blade ensures stability and accuracy. Well-suited tungsten carbide-tipped (TCT) circular saw blades are made with proficiency and designed with thin kerf for fast and smooth cutting action.
  • Our TCT saw blades are designed to meet industrial standards and offer fast convenient mounting. Our saw blades make quick and easy mounting on grinding tools of various brands.
  • Efficient TCT saw blades are used in various industries like automotive, woodworking, DIY, shipbuilding, foundries, construction, welding, fabrication, etc.
  • All benchmark abrasives products are made with quality materials and exceed ANSI and EU European Standards. We trust in delivering high-quality products to the end-user. Customer satisfaction is the lifeline of our brand.

7

Bosch CBCL1260M 12 In. 60 Tooth Edge Cordless Circular Saw Blade for General Purpose

  • USE WITH: Optimized for any 12″ miter saw or slide miter saw
  • VERSATILITY: Best for fast cross cutting, cutoff and trim of wood and plywood
  • PRECISION: SpeedCoat antifriction finish for faster and effortless cutting
  • DURABLE: Blades are designed for tough construction jobs, because they are engineered with Brute Carbide, an upgraded C3/C4 micrograin carbide formulation that increases impact resistance
  • LONGEVITY: Bosch cordless blades are optimized for cordless cutting, with reduced kerf for speed, less waste, and extended battery life

8

Concord Blades WCB1200T040HP 12-Inch 40 Teeth TCT General Purpose Hard & Soft Wood Saw Blade

  • Professional quality, construction grade for ripping & crosscutiing of thick hardwoods up to 3 1/2″ thick and soft woods up to 1″ thick
  • For use on Miter Saws, Circular Saws, Table Saws, Hand Saws and Chop Saws. RPM up to 4,500
  • Ideal for cutting Hard Wood, Soft Wood, Exotic Wood and Abrasive Wood.
  • Thin kerf allows a smooth finish w/ minimal waste. Lower hook angle improves the surface quality of the cut, increases the feed pressure required.
  • 3.0 mm kerf design, ATB Grind & 18Degree hook

9

BOSCH DCB1040 Daredevil 10-Inch 40-Tooth General Purpose Circular Saw Blade , Blue

  • Brute Carbide – an upgraded C3/C4 micrograin formulation for increased impact damage resistance
  • ATB tooth geometry – for fast cross cutting, cutoff and trim of wood and plywood
  • SpeedCoat – an antifriction finish for faster cutting with no burning or melting
  • Thinner kerf – provides faster cuts and less waste
  • Extra-hard steel blade body – delivers accuracy and resists bending and deflection for true cuts

10

Bosch CBCL1024T 10 In. 24 Tooth Edge Cordless Circular Saw Blade for General Purpose

  • USE WITH: Compatible with any 10″ portable or stationary table saw
  • VERSATILITY: Best for fast cross cutting and ripping plywood, pressure treated, hard & soft woods
  • LONGEVITY: Bosch cordless blades are optimized for cordless cutting, with reduced kerf for speed, less waste, and extended battery life
  • PRECISION: SpeedCoat antifriction finish for faster and effortless cutting
  • DURABLE: Blades are designed for tough construction jobs, because they are engineered with Brute Carbide, an upgraded C3/C4 micrograin carbide formulation that increases impact resistance

Before I start showing the circular saw blade replacement steps, let me tell in short about different circular saw blade types.

  • Combination blades
  • Crosscutting blades
  • Ripping blades
  • Dado blades
  • Plywood blades
  • Hollow ground blades
  • Thin Kerf blades
  • Abrasive blades
  • Continuous Rim/Diamond blades
  • Turbo Rim blades

Different Types of Circular Saw Blades

Combination Blades

This kind of best circular saw blade for general use is a good fit for different DIY enthusiasts as it offers versatile use with a simple design. When you don’t need too much perfection, you can use a combination blade. Typically, you will want to cut things like hardwoods, softwoods, wood grains with this sort of blades.

Crosscutting Blades

This type of blades typically has around 48 small gullets teeth to cut across the object like wood grain smoothly. However, a crosscutting blade is a good option for only short wood grain.

Ripping Blades

The use of ripping blades is almost similar to the crosscutting blades. I mean, both of them are used to cut across the wood grain. However, ripping blades are suitable for cutting long wood grains, and they have fewer teeth with larger gullets than crosscutting blades.

Dado Blades

If you want to cut grooves of different widths, then the dado blade is the type you should go for. You will find two types of dado blades – stacked dado blades, and wobble dado blades. Stacked dado blades have two circular saw blades, some chipper blades, and shims stacked together.

On the other hand, wobble dado blades consist of a simple circular blade mounted on an adjustable hub.

Plywood Blades

The name says it all. This type of blade is mainly used to cut plywood. Plywood blades typically have around 100 teeth and small gullets that helps to deal with plywood cutting effortlessly.

Dremel Ultra-saw (US40) is a perfect tool to fit this kind of plywood blade to cut plywood.

Hollow Ground Blades

Hollow ground blades are made to cut coated boards like plywood smoothly. One of the main differences between a plywood blade and a hollow ground blade is, the later one has a thinner body than the teeth. It helps to turn aside the binding. Hollow ground blades are also used to cut across the wood grains.

Thin Kerf Blades

Thin Kerf blades are used to cut small wood pieces, that’s why it’s a handy option for cutting dimensional or engineered lumber. The word ‘kerf’ means the cut width. So, as you are guessing, thin kerf means narrow cutting here. Don’t use this type of blade to cut stricter wood.

Abrasive Blades

This type of blade doesn’t have teeth to cut the materials. It uses abrasive materials like silicon carbide or aluminum oxide to cut materials like tiles, concrete, masonry, brick, or steel.

Continuous Rim/Diamond blades

Diamond blades serve almost the same purpose as the abrasive blades do. That means this type of blade is also the right choice for cutting materials like tiles, ceramic, glass, concrete, etc. Diamond blades offer a much cleaner finish than an abrasive blade.

Rotorazer and some of its alternatives are some of the right fits for this kind of diamond blades.

Turbo Rim Blades

Turbo rim blades look pretty similar to the continuous rim blades. But these blades cut more aggressively than the continuous rim blades. Nonetheless, turbo rim blades don’t offer clean finish, that a continuous rim blade can to do. It is used to cut materials like concrete, brick, etc.

How to change the best circular saw blade for general use

You must change a circular saw blade if you are finding difficulties in cutting the materials or if you find the edge isn’t sharp anymore. Nevertheless, changing a circular saw blade is a pretty straightforward process and can be done in a quick time.

  • First and foremost, you have to unplug the unit if you are using the standard saw. If you are using a cordless circular saw, then remove the battery. The idea here is to avoid any accidental firing up of the machine when you are changing the best circular saw blade for general use.
  • Second, press the spindle lock button that is located near the blade guard, and then turn the blade until you see it engaged. That means turn the blade until it stops turning.
  • Next, loosen the bolt.
  • Then unscrew the bolt to remove it. Also, remove washers if there is any.
  • Next, pull the lower blade guard and move it out of the way.
  • Now, remove the blade.
  • After that, place the new blade keeping the blade face in the right direction. You have to match the direction of the arrow on the blade body and the arrow on the blade guard.
  • Then place the washer and bolts and tighten them again. 
  1. Can I cut steel with a circular saw?
  • Yes, you can cut steel with a circular saw. You just have to use the appropriate blade in this case. An excellent abrasive blade will do the work.
  1. Is it possible to sharpen the circular saw blade?
  • Yes, it is possible to sharpen the best circular saw blade for general use. You can use any hand file or an automatic file to sharpen a steel-toothed blade. If it’s a carbide-tipped, then better take it to the professional sharpening service because it requires a diamond wheel sharpener to get things done when it’s a carbide-tipped blade.
  1. How to know when I need to replace the circular saw blade?
  • When you see the blade is chipping the wood instead of cutting the wood, it’s time to replace the blade because your blade is dull at this point.

Final Verdict

In this article, I’ve given you an idea about different circular saw blade types. Then I mentioned the different steps involved in changing best circular saw blade for general use. Finally, I answered some of the frequently asked questions. Please make sure to buy the right size blade for the saw you are using and always wear safety gear when you operate the saw.

Leave a Comment