Best Circular Saw Blade For Framing

Changing a circular saw blade is not as hard as you might have been thinking. However, it can be a cause of serious injury if you don’t know how to change a circular saw blade properly. Don’t be troubled, as I’m going to show you the steps in a moment. Additionally, I will also give you a gist of best circular saw blade for framing.

# Preview Product Score
1 Makita B-61656-3 7-1/4″ 24T Carbide-Tipped Max Efficiency Circular… 9.4
2 Makita D-45989-10 7-1/4″ 24T Carbide-Tipped Circular Saw Blade,… 9.4
3 Diablo D0724A 7-1/4″ 24T Diablo™ Circular Saw Framing… 9.6
4 Makita A-94530-10 7-1/4″ 24T Carbide-Tipped Ultra-Coated Circular Saw… 9.4
5 DEWALT Circular Saw Blade, 6 1/2 Inch, 24… 9.4
6 DEWALT Circular Saw Blade, 6 1/2 Inch, 40… 9.4
7 DEWALT Circular Saw Blade, 7 1/4 Inch, 24… 9.4
8 Freud D0624X Diablo 6-1/2-Inch 24-Tooth ATB Framing Saw… 9.7
9 Freud D0724A Diablo 7-1/4-Inch 24 Tooth ATB Framing… 9.8
10 Diablo D0724A 7-1/4in 24T ATB Framing Saw Blade… 9.8
1

Makita B-61656-3 7-1/4″ 24T Carbide-Tipped Max Efficiency Circular Saw Blade, Framing, 3/pk

  • Up to 70% more cuts per charge compared to standard blades
  • Up to 70% faster cutting compared to standard blades
  • Ultra-Thin 0.057″ kerf reduces the load put on the tool
  • High grade Tungsten carbide tips for durability
  • Special ATAFR (Alternate Top Alternate Face w/ Raker) carbide tips provide smoother and faster cuts

2

Makita D-45989-10 7-1/4″ 24T Carbide-Tipped Circular Saw Blade, Framing/General Purpose, 10/pk

  • ATAF (Alternate Top and Alternate Face) Tooth Design for precision cutting
  • Fully hardened and expertly tensioned plate for true cuts
  • Ultra-thin kerf carbide-tipped design provides smoother cuts with less drag on the motor and minimal material loss
  • Large expansion slots for reduced noise and vibration
  • Laser cut heat vents engineered to dissipate heat

3

Diablo D0724A 7-1/4″ 24T Diablo™ Circular Saw Framing Blade

  • Kerf:0.059 inch

4

Makita A-94530-10 7-1/4″ 24T Carbide-Tipped Ultra-Coated Circular Saw Blade, Framing, 10/pk, Black

  • Ultra-coated blades provide reduced pitch build-up
  • M shaped tooth has two cutting points to provide the speed of 24 tooth with the finish of 48 tooth
  • High grade C-3, fine-grain Tungsten carbide tips for longer durability
  • Greater wear area and more cutting tips increase the life up to 2X more than a traditional framing blade
  • Exclusive dual-beveled tooth face has two 10° angles

5

DEWALT Circular Saw Blade, 6 1/2 Inch, 24 Tooth, Framing (DWA161224)

  • Exclusive, patent-pending toughtrack tooth design for accurate tracking over the life of the blade
  • Made from high-density tungsten Carbide for toughness, wear-resistance, and long life
  • Tough coat anti-stick coating reduces friction and gumming
  • Thin kerf design for smooth cuts
  • Reinforced shoulder for impact resistance in nail-embedded wood

6

DEWALT Circular Saw Blade, 6 1/2 Inch, 40 Tooth, Framing (DWA161240)

  • Made from high-density tungsten Carbide for toughness, wear-resistance, and long life
  • Tough coat anti-stick coating reduces friction and gumming
  • Thin kerf design for smooth cuts
  • Reinforced shoulder for impact resistance in nail-embedded wood
  • Optimized for use on both corded and cordless circular saws

7

DEWALT Circular Saw Blade, 7 1/4 Inch, 24 Tooth, Wood Cutting (DWA171424)

  • Exclusive, patent-pending toughtrack tooth design for accurate tracking over the life of the blade
  • Made from high-density tungsten Carbide for toughness, wear-resistance, and long life
  • Tough coat anti-stick coating reduces friction and gumming
  • Thin kerf design for smooth cuts
  • Reinforced shoulder for impact resistance in nail-embedded wood

8

Freud D0624X Diablo 6-1/2-Inch 24-Tooth ATB Framing Saw Blade with 5/8-Inch Arbor, multi

  • Features Freud’s TiCo Hi-Density Carbide with Titanium for long life and a flawless finish
  • Super thin laser cut kerf gives extremely fast, durable, and clean cuts
  • Laser-cut stabilizer vents trap noise and vibration keeping the blade cool and reducing blade warp
  • Non-stick Perma-Shield Coating reduces gumming, rusting, and corrosion – ideal for decks
  • Laser-cut blade plate for true cuts 5/8″ arbor with diamond knockout

9

Freud D0724A Diablo 7-1/4-Inch 24 Tooth ATB Framing Saw Blade with 5/8-Inch & Diamond Knockout Arbor (2 Pack)

  • Super thin laser cut kerf gives extremely fast, durable, and clean cuts
  • Non-stick perm shield coating reduces gumming, rusting, and corrosion – ideal for decks
  • Durable micro grain titanium carbide for extreme durability and razor-sharp cuts
  • Laser cut Stabilizer vents trap noise and vibration keeping the blade Cool and reducing blade warp
  • Laser cut blade plate for true cuts

10

Diablo D0724A 7-1/4in 24T ATB Framing Saw Blade 5/8in & Diamond Knockout Arbor

  • Super thin laser cut kerf gives extremely fast, durable, and clean cuts
  • Non-stick permashield coating reduces gumming, rusting, and corrosion – ideal for decks
  • Durable micrograin titanium carbide for extreme durability and razor-sharp cuts
  • Laser cut stabilizer vents trap noise and vibration keeping the blade cool and reducing blade warp
  • Laser cut blade plate for true cuts, Imported

Before I start showing the circular saw blade replacement steps, let me tell in short about different circular saw blade types.

  • Combination blades
  • Crosscutting blades
  • Ripping blades
  • Dado blades
  • Plywood blades
  • Hollow ground blades
  • Thin Kerf blades
  • Abrasive blades
  • Continuous Rim/Diamond blades
  • Turbo Rim blades

Different Types of Circular Saw Blades

Combination Blades

This kind of best circular saw blade for framing is a good fit for different DIY enthusiasts as it offers versatile use with a simple design. When you don’t need too much perfection, you can use a combination blade. Typically, you will want to cut things like hardwoods, softwoods, wood grains with this sort of blades.

Crosscutting Blades

This type of blades typically has around 48 small gullets teeth to cut across the object like wood grain smoothly. However, a crosscutting blade is a good option for only short wood grain.

Ripping Blades

The use of ripping blades is almost similar to the crosscutting blades. I mean, both of them are used to cut across the wood grain. However, ripping blades are suitable for cutting long wood grains, and they have fewer teeth with larger gullets than crosscutting blades.

Dado Blades

If you want to cut grooves of different widths, then the dado blade is the type you should go for. You will find two types of dado blades – stacked dado blades, and wobble dado blades. Stacked dado blades have two circular saw blades, some chipper blades, and shims stacked together.

On the other hand, wobble dado blades consist of a simple circular blade mounted on an adjustable hub.

Plywood Blades

The name says it all. This type of blade is mainly used to cut plywood. Plywood blades typically have around 100 teeth and small gullets that helps to deal with plywood cutting effortlessly.

Dremel Ultra-saw (US40) is a perfect tool to fit this kind of plywood blade to cut plywood.

Hollow Ground Blades

Hollow ground blades are made to cut coated boards like plywood smoothly. One of the main differences between a plywood blade and a hollow ground blade is, the later one has a thinner body than the teeth. It helps to turn aside the binding. Hollow ground blades are also used to cut across the wood grains.

Thin Kerf Blades

Thin Kerf blades are used to cut small wood pieces, that’s why it’s a handy option for cutting dimensional or engineered lumber. The word ‘kerf’ means the cut width. So, as you are guessing, thin kerf means narrow cutting here. Don’t use this type of blade to cut stricter wood.

Abrasive Blades

This type of blade doesn’t have teeth to cut the materials. It uses abrasive materials like silicon carbide or aluminum oxide to cut materials like tiles, concrete, masonry, brick, or steel.

Continuous Rim/Diamond blades

Diamond blades serve almost the same purpose as the abrasive blades do. That means this type of blade is also the right choice for cutting materials like tiles, ceramic, glass, concrete, etc. Diamond blades offer a much cleaner finish than an abrasive blade.

Rotorazer and some of its alternatives are some of the right fits for this kind of diamond blades.

Turbo Rim Blades

Turbo rim blades look pretty similar to the continuous rim blades. But these blades cut more aggressively than the continuous rim blades. Nonetheless, turbo rim blades don’t offer clean finish, that a continuous rim blade can to do. It is used to cut materials like concrete, brick, etc.

How to change the best circular saw blade for framing

You must change a circular saw blade if you are finding difficulties in cutting the materials or if you find the edge isn’t sharp anymore. Nevertheless, changing a circular saw blade is a pretty straightforward process and can be done in a quick time.

  • First and foremost, you have to unplug the unit if you are using the standard saw. If you are using a cordless circular saw, then remove the battery. The idea here is to avoid any accidental firing up of the machine when you are changing the best circular saw blade for framing.
  • Second, press the spindle lock button that is located near the blade guard, and then turn the blade until you see it engaged. That means turn the blade until it stops turning.
  • Next, loosen the bolt.
  • Then unscrew the bolt to remove it. Also, remove washers if there is any.
  • Next, pull the lower blade guard and move it out of the way.
  • Now, remove the blade.
  • After that, place the new blade keeping the blade face in the right direction. You have to match the direction of the arrow on the blade body and the arrow on the blade guard.
  • Then place the washer and bolts and tighten them again. 
  1. Can I cut steel with a circular saw?
  • Yes, you can cut steel with a circular saw. You just have to use the appropriate blade in this case. An excellent abrasive blade will do the work.
  1. Is it possible to sharpen the circular saw blade?
  • Yes, it is possible to sharpen the best circular saw blade for framing. You can use any hand file or an automatic file to sharpen a steel-toothed blade. If it’s a carbide-tipped, then better take it to the professional sharpening service because it requires a diamond wheel sharpener to get things done when it’s a carbide-tipped blade.
  1. How to know when I need to replace the circular saw blade?
  • When you see the blade is chipping the wood instead of cutting the wood, it’s time to replace the blade because your blade is dull at this point.

Final Verdict

In this article, I’ve given you an idea about different circular saw blade types. Then I mentioned the different steps involved in changing best circular saw blade for framing. Finally, I answered some of the frequently asked questions. Please make sure to buy the right size blade for the saw you are using and always wear safety gear when you operate the saw.

Leave a Comment