Best Circular Saw Blade For Fine Woodworking

Changing a circular saw blade is not as hard as you might have been thinking. However, it can be a cause of serious injury if you don’t know how to change a circular saw blade properly. Don’t be troubled, as I’m going to show you the steps in a moment. Additionally, I will also give you a gist of best circular saw blade for fine woodworking.

# Preview Product Score
1 WEN BL1060 10-Inch 60-Tooth Fine-Finish Professional Woodworking Saw… 9.4
2 Circular Saw Blade 8-1/4-Inch 80 Tooth Fine Finish… 9.0
3 WEN BL1280 12-Inch 80-Tooth Fine-Finish Professional Woodworking Saw… 9.4
4 4.5″(110mm) Circular Saw Blade 60 Tooth Cutting Fine… 9.5
5 WEN BL1040 10-Inch 40-Tooth Carbide-Tipped Professional Woodworking Saw… 9.4
6 TOMAX 12 Inch 60 Tooth ATB Fine Finish… 9.5
7 King Arthur’s Tools Patented Lancelot 14 Tooth Circular… 8.8
8 WEN BL1232-2 12-Inch 32-Tooth and 80-Tooth Carbide-Tipped Professional… 9.4
9 WEN BL1248 12-Inch 48-Tooth Carbide-Tipped Professional Woodworking Saw… 9.4
10 KHCRAFT Laser-Cut Circular Saw Blade 10 Inch 40… 9.7
1

WEN BL1060 10-Inch 60-Tooth Fine-Finish Professional Woodworking Saw Blade for Miter Saws and Table Saws

  • Featuring a 10-inch diameter (254 mm), a 5/8-inch arbor (15.88 mm) and a rating of up to 6000 RPM
  • Perfect for slicing through both hard and softwoods of all kinds
  • Ultra-thin 1/10-inch kerf (2.4 mm) provides clean and efficient cuts
  • Designed with 60 carbide-tipped teeth for fine-finish wood cutting
  • Compatible with the majority of 10-inch miter saws, jobsite saws, and table saws

2

Circular Saw Blade 8-1/4-Inch 80 Tooth Fine Finish Thin Kerf 30mm Bore Diameter Rotary Tool Cutting Disc Cemented Carbide with 3 O-Rings for Woodworking/Metal/Plastic Cutting

  • HIGH QUALITY CEMENTED CARBIDE MATERIAL: Made of high quality cemented carbide, this circular saw blade is quite durable.
  • PROVIDE FAST AND FLUENT CUTTING: 80 evenly arranged teeth are very sharp which ensure fast and fluent cutting. Ultra thin kerf for minimum waste.
  • SMOOTH CUT: Cemented carbide saw blade gives it great resistance to abrasion and ability to handle high heat for a cleaner and smoother cut.You can get ideal and perfect carpentry and crafts with these Circular Blades
  • APPLICATION: Widely used on marble cutting machines, electric hand saws, sliding table saws, hand-held saws, and push table saws
  • IDEAL TOOL FOR YOU: This saw blade has a high hardness to offer a stability, durability and high efficiency for you, you can get a more accurate, fast and preciseness cutting compared with other types of cutting tools

3

WEN BL1280 12-Inch 80-Tooth Fine-Finish Professional Woodworking Saw Blade for Miter Saws and Table Saws

  • Featuring a 12-inch diameter (305 mm), a 1-inch arbor (25.4 mm) and a rating of up to 6000 RPM
  • Perfect for slicing through both hard and softwoods of all kinds
  • Ultra-thin 1/10-inch kerf (2.6 mm) provides clean and efficient cuts
  • Designed with 80 carbide-tipped teeth for fine-finish wood cutting
  • Compatible with the majority of 12-inch miter saws, jobsite saws, and table saws

4

4.5″(110mm) Circular Saw Blade 60 Tooth Cutting Fine Finishing Table Saw Blades for Woodworking Rotary Tool with 3/5″(16mm) Arbor

  • &#9733[PACKAGING INCLUDES] – 1Pc Saw Blade.
  • &#9733[MATERIAL,SIZE] – iron;Diameter:110mm/4 inch;Bore diameter:16mm/3/5inch;Thickness:1.0mm/1/25 inch;Teeth:60T.
  • &#9733[FUNCTION] – Used for cutting wood, plastic,and soft materials.
  • &#9733[HIGH QUALITY] – Smooth surfaces of the blades, from repeated coarse and fine grinding treatment.Thin kerf for fast and smooth cutting action and minimum waste.
  • &#9733[AFTER SALE] – Manufacturer warranty for 90 days from date of purchase.We are committed to provide excellent customer service,If you have any questions,please contact us.We will try our best to solve your problem.

5

WEN BL1040 10-Inch 40-Tooth Carbide-Tipped Professional Woodworking Saw Blade for Miter Saws and Table Saws

  • Featuring a 10-inch diameter (254 mm), a 5/8-inch arbor (15.88 mm) and a rating of up to 6000 RPM
  • Perfect for slicing through both hard and softwoods of all kinds
  • Ultra-thin 1/10-inch kerf (2.4 mm) provides clean and efficient cuts
  • Designed with 40 carbide-tipped teeth for general-purpose wood cutting
  • Compatible with the majority of 10-inch miter saws, jobsite saws, and table saws

6

TOMAX 12 Inch 60 Tooth ATB Fine Finish General Purpose Woodworking Saw Blade

  • Ideal for various wood material such as Soft Wood, Hard Wood, Exotic Wood and Abrasive Wood
  • For use on Miter Saws, Circular Saws and Table Saws
  • Construction grade carbide teeth provide maximum resistance for longer life
  • Electrophoretic Coating reduces the rusting and corrosion
  • Quality Guarantee, Limited Lifetime Warranty by TOMAX

7

King Arthur’s Tools Patented Lancelot 14 Tooth Circular Saw Blade Carving Disc for Woodworking, Removal, Cutting, and Shaping – 5/8” Bore, Fits Most Standard 4 1/2″, 115-125mm Angle Grinders #45814

  • LANCELOT – King Arthur’s Tools award winning 4” Lancelot 14 tooth chainsaw disc blades are the most aggressive but controlled cut of all our blades in removing the most wood. Great for professional and amateur woodworkers, wood carvers and sculptors.
  • MULTIFUNCTION – Convert your angle grinder into a wood cutting saw, excellent for rapid wood removal, cutting, and general shaping. Cuts everything from hardwood, plastics and other soft non-ferrous materials. You can use up to seven different tandem blade combinations when paired together.
  • TECHNOLOGY – Our blades are made of premium quality steel to maximize strength, making it virtually unbreakable even under aggressive use. All our full house design blades have twice the amount of regular teeth resulting in the blade powering its way through the hardest of woods.
  • SAFETY – Should the blade hit a nail or piece of wire in wood, the impact will cause the chain to stop while the discs rotate giving the user a warning to stop the angle grinder. This is a major safety feature which virtually eliminates kickback and binding.
  • VALUE – All Teeth can be easily sharpened with a standard 5/32″ (4mm) file to provide an extremely long service life for big woodworking projects. The chain saw blade can be easily replaced with our King Arthur’s Tools replacement parts.

8

WEN BL1232-2 12-Inch 32-Tooth and 80-Tooth Carbide-Tipped Professional Woodworking Saw Blade Set, Two Pack

  • Featuring both a 32-tooth blade for general woodcutting and a 80-tooth blade for fine-finish woodworking
  • Blades measure in at 12-inch diameter (305 mm) with a 1-inch arbor (25.4 mm) and a rating of up to 6000 RPM
  • Ultra-thin 1/10-inch kerf (2.6 mm) provides clean and efficient cuts
  • Perfect for slicing through both hard and softwoods of all kinds
  • Compatible with the majority of 12-inch miter saws, jobsite saws, and table saws

9

WEN BL1248 12-Inch 48-Tooth Carbide-Tipped Professional Woodworking Saw Blade for Miter Saws and Table Saws

  • Featuring a 12-inch diameter (305 mm), a 1-inch arbor (25.4 mm) and a rating of up to 6000 RPM
  • Perfect for slicing through both hard and softwoods of all kinds
  • Ultra-thin 1/10-inch kerf (2.6 mm) provides clean and efficient cuts
  • Designed with 48 carbide-tipped teeth for general-purpose wood cutting
  • Compatible with the majority of 12-inch miter saws, jobsite saws, and table saws

10

KHCRAFT Laser-Cut Circular Saw Blade 10 Inch 40 Teeth ATB 5/8 Inch Arbor 2-Piece General Purpose for Fine Woodworking

  • Made by Laser-Cut technology, much better than traditional punching process. Punching always has negative effects on the body of the saw blade like deformation and stress, but Laser-Cut could avoid these problems. So Laser-Cut could reduce vibration and noise, maintain durability and cutting precision, keep the blade running cooler.
  • Tungsten carbide tips are carefully welded to each blade tooth using computerized technology to control the exactness of the saw blades. An automated grinding process yields accurate tip geometry to increase the life and performance of the ATB C3 carbide teeth.
  • With noise reduction lines, which is the feature of high quality saw blades; large micro grain tungsten carbide teeth, which provides extreme durability and longevity and allows professional resharpening and prolongs blade life; tri-metal shock resistant brazing, which allows the tips to withstand extreme impact for maximum durability; electrophoresis coating, which protects against rust.
  • Ideal for dry wood applications such as ripping, cross cutting, and miter cutting on hardwood, softwood, high-quality finished lumber, rough framing lumber, plywood, hardboard, MDF and OSB. Do not use to cut steel or iron.
  • The product is a 2-Piece saw blades set. Our saw blades are all insured by AIG with Liability Insurance. Packed in card box each.

Before I start showing the circular saw blade replacement steps, let me tell in short about different circular saw blade types.

  • Combination blades
  • Crosscutting blades
  • Ripping blades
  • Dado blades
  • Plywood blades
  • Hollow ground blades
  • Thin Kerf blades
  • Abrasive blades
  • Continuous Rim/Diamond blades
  • Turbo Rim blades

Different Types of Circular Saw Blades

Combination Blades

This kind of best circular saw blade for fine woodworking is a good fit for different DIY enthusiasts as it offers versatile use with a simple design. When you don’t need too much perfection, you can use a combination blade. Typically, you will want to cut things like hardwoods, softwoods, wood grains with this sort of blades.

Crosscutting Blades

This type of blades typically has around 48 small gullets teeth to cut across the object like wood grain smoothly. However, a crosscutting blade is a good option for only short wood grain.

Ripping Blades

The use of ripping blades is almost similar to the crosscutting blades. I mean, both of them are used to cut across the wood grain. However, ripping blades are suitable for cutting long wood grains, and they have fewer teeth with larger gullets than crosscutting blades.

Dado Blades

If you want to cut grooves of different widths, then the dado blade is the type you should go for. You will find two types of dado blades – stacked dado blades, and wobble dado blades. Stacked dado blades have two circular saw blades, some chipper blades, and shims stacked together.

On the other hand, wobble dado blades consist of a simple circular blade mounted on an adjustable hub.

Plywood Blades

The name says it all. This type of blade is mainly used to cut plywood. Plywood blades typically have around 100 teeth and small gullets that helps to deal with plywood cutting effortlessly.

Dremel Ultra-saw (US40) is a perfect tool to fit this kind of plywood blade to cut plywood.

Hollow Ground Blades

Hollow ground blades are made to cut coated boards like plywood smoothly. One of the main differences between a plywood blade and a hollow ground blade is, the later one has a thinner body than the teeth. It helps to turn aside the binding. Hollow ground blades are also used to cut across the wood grains.

Thin Kerf Blades

Thin Kerf blades are used to cut small wood pieces, that’s why it’s a handy option for cutting dimensional or engineered lumber. The word ‘kerf’ means the cut width. So, as you are guessing, thin kerf means narrow cutting here. Don’t use this type of blade to cut stricter wood.

Abrasive Blades

This type of blade doesn’t have teeth to cut the materials. It uses abrasive materials like silicon carbide or aluminum oxide to cut materials like tiles, concrete, masonry, brick, or steel.

Continuous Rim/Diamond blades

Diamond blades serve almost the same purpose as the abrasive blades do. That means this type of blade is also the right choice for cutting materials like tiles, ceramic, glass, concrete, etc. Diamond blades offer a much cleaner finish than an abrasive blade.

Rotorazer and some of its alternatives are some of the right fits for this kind of diamond blades.

Turbo Rim Blades

Turbo rim blades look pretty similar to the continuous rim blades. But these blades cut more aggressively than the continuous rim blades. Nonetheless, turbo rim blades don’t offer clean finish, that a continuous rim blade can to do. It is used to cut materials like concrete, brick, etc.

How to change the best circular saw blade for fine woodworking

You must change a circular saw blade if you are finding difficulties in cutting the materials or if you find the edge isn’t sharp anymore. Nevertheless, changing a circular saw blade is a pretty straightforward process and can be done in a quick time.

  • First and foremost, you have to unplug the unit if you are using the standard saw. If you are using a cordless circular saw, then remove the battery. The idea here is to avoid any accidental firing up of the machine when you are changing the best circular saw blade for fine woodworking.
  • Second, press the spindle lock button that is located near the blade guard, and then turn the blade until you see it engaged. That means turn the blade until it stops turning.
  • Next, loosen the bolt.
  • Then unscrew the bolt to remove it. Also, remove washers if there is any.
  • Next, pull the lower blade guard and move it out of the way.
  • Now, remove the blade.
  • After that, place the new blade keeping the blade face in the right direction. You have to match the direction of the arrow on the blade body and the arrow on the blade guard.
  • Then place the washer and bolts and tighten them again. 
  1. Can I cut steel with a circular saw?
  • Yes, you can cut steel with a circular saw. You just have to use the appropriate blade in this case. An excellent abrasive blade will do the work.
  1. Is it possible to sharpen the circular saw blade?
  • Yes, it is possible to sharpen the best circular saw blade for fine woodworking. You can use any hand file or an automatic file to sharpen a steel-toothed blade. If it’s a carbide-tipped, then better take it to the professional sharpening service because it requires a diamond wheel sharpener to get things done when it’s a carbide-tipped blade.
  1. How to know when I need to replace the circular saw blade?
  • When you see the blade is chipping the wood instead of cutting the wood, it’s time to replace the blade because your blade is dull at this point.

Final Verdict

In this article, I’ve given you an idea about different circular saw blade types. Then I mentioned the different steps involved in changing best circular saw blade for fine woodworking. Finally, I answered some of the frequently asked questions. Please make sure to buy the right size blade for the saw you are using and always wear safety gear when you operate the saw.

Leave a Comment